This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Machine is little dead after 2 Days

Dear All,

i am using astaro 6.300 on Dual Pentium3 with 1 GB RAM and 40 GB Harddisk.
After 2 - 3 days the Firewall is not accesible anymore. If i am logon on the shell direct on the machine i can not ping anything. The networkcards seem to be down.

I do normally recieve emails if anything is down and restarted. But here - nothing.

After a reboot everything is fine. Only the load is on both CPU everytime on 50 to 70 % with confd-daemon.

Does anyone have an idea?

This thread was automatically locked due to age.

Parents

0 alasc over 19 years ago

Please post output of "ps -aux"

and please post the size of your real memory.
Post "cat /proc/mtrr"

Alex
Cancel
Vote Up 0 Vote Down

Cancel
0 Krischeu over 19 years ago in reply to alasc

Please post output of "ps -aux"

and please post the size of your real memory.
Post "cat /proc/mtrr"

Alex

what is the username? root/admin/??? --> somehow not really working.
Cancel
Vote Up 0 Vote Down

Cancel
0 Krischeu over 19 years ago in reply to Krischeu

I am really interested, why the machine is soooo busy.
Cancel
Vote Up 0 Vote Down

Cancel
0 alasc over 19 years ago in reply to Krischeu

Sorry for the delay.

Maybe some tests will show more...

Try reinstalling the ASL without SMP kernel.

Please give it a try.

Alex
Cancel
Vote Up 0 Vote Down

Cancel
0 Krischeu over 19 years ago in reply to alasc

di you think that 1 CPU is enough for 3 tunnels a 2 Mbit/s

I will try reinstalling this weekend.
Cancel
Vote Up 0 Vote Down

Cancel
0 drees over 19 years ago in reply to Krischeu

Yes, 1 PentiumIII CPU should be plenty for 2Mbps VPN.
Cancel
Vote Up 0 Vote Down

Cancel
0 alasc over 19 years ago in reply to drees

Yes this will work ...

I do this with 4 Tunnels .My Cpu is an P3 933Mhz with 512MB Ram, while the cpu isn´t busy at all.

Try it out.

Alex
Cancel
Vote Up 0 Vote Down

Cancel
0 Krischeu over 19 years ago in reply to alasc

if 1 GHz is enough, why is this mache sooo busy?
Cancel
Vote Up 0 Vote Down

Cancel
0 NimmdirKeks over 19 years ago in reply to Krischeu

Can you attach the device to a monitor? Would be interresting if the device goes into a kernel panic or just freezes.
Cancel
Vote Up 0 Vote Down

Cancel
0 Krischeu over 19 years ago in reply to NimmdirKeks

Hi everybody,

i installed it as new.
First try was to install it as nosmp.
This was not working, etiher i was changeing the mps in bios for multiple prozessors from v.1.4 to 1.1 (There was a bug in early days of suse and asus bios).
Astaro is working on Suse Enterprise 9 so i looked araound in my notices and there it is, i have to disable apm and apic.

Therfore i was choosing the classic at bootpromt. seems to be better - BUT only one cpu is detected.

To: nimmdirkeks: the machine is not really dead, only a little bit. the networkcards are all not working, but the system don't recognise this!
There is not output at the connected screeen
Cancel
Vote Up 0 Vote Down

Cancel
0 Krischeu over 19 years ago in reply to Krischeu

i installed it from scratch.
Installation from 6.100.
confd seems to be working in a normal way.
--> update with patches to 6.301 --> confd is now taking all the cpu power.

dont't look like a problem with smp-kernel. looks like a problem from astaro!
They patched my machine to dead.
Cancel
Vote Up 0 Vote Down

Cancel
0 alasc over 19 years ago in reply to Krischeu

You did all patches starting from 6.100 ??

There is an ISO image of V6.3 ....

I don ´t know anyone other who has same problems as you have.
I started with V6.0 and patched all the time till now.

Maybe your hardware is faulty ..

Check it or try installing V6.3 from scratch.

Alex
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 alasc over 19 years ago in reply to Krischeu

You did all patches starting from 6.100 ??

There is an ISO image of V6.3 ....

I don ´t know anyone other who has same problems as you have.
I started with V6.0 and patched all the time till now.

Maybe your hardware is faulty ..

Check it or try installing V6.3 from scratch.

Alex
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data