This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Trouble with getting 5.100 to work right!

OK, I went back and installed 5.100 on a test network.
I established a internet connection and tested everything out,
set up a single packet rule to allow everything..
Now I have gotten a  alicd not running - restarted email twice in the 4 hours that the firewall has been up.
I'm running 5.103 .
the error email shows 2 of 25 users active -- but I only have 1 computer on this network.

What can I do to stop these messages?
Thanks!
Paul JOhnson


P.S. 

OK, now I've gotten the alicd restarted msg 14 times in the 14 1/2 hours that the firewall has been running.  It seems to happen every 50-70 minutes -- not always at 60 minutes, but very close to every 60 minutes.  Any ideas anyone?

P.P.S. 
OK -- so more info -- maybe this is look like something one or y'all has seen before? 
The primary connection dropped last night about 10:30 pm and system load shot up to the 5-6 range and stayed there until 6:30am.  I don't see what happed at 6:30 am that changed anything.   The primary conenction never did come back up.  I reset the license count and rebooted this am @ 8:40am -- this re-connected the primary link . System load is back to 0.4-0.6 range.  
I am using a IBM Netfinity 5600 w/ a PIII-733 and 1 Gig memory -- 5 18 Gig SCSI hard drives all mirrored together (yeah It's not a fast enough processor and overkill on the HDDs, but It's what I had laying around.....)
Any ideas?
Anyone?
Bueller?


This thread was automatically locked due to age.
  • One more thing -- on the System >> Licensing tab it shows Total 0 entries on the current uses (IPs) listing box.
    Paul Johnson
  • Paul,

    I'm an Astaro-trained engineer and it sounds (on the surface, anyway) like your problems might be related to a configuration problem.  The 733 Mhz box is a bit slow, but it should still work acceptably in a small environment.  I've got a little time this weekend and if you want I'd be happy to talk with you on the phone and log in to your firewall and look around.  Send an emal to steve@officedefender.com if I can be of help.  I'm in Virginia.

    -Steve