Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 2 subscribers
  • Views 500 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Intel Pro/100S Server Adapter and HA installation

asc
Hi!

I´ve got some questions about setting up an HA system with Astaro 4.016:
* Is it possible to use only one port of an Intel Pro/100S Server Adapter for the link beat detection when setting up the HA option - while using the other port for DMZ?
* What exactly are the minimum steps to install the second HA server? Simply install the software, configure the admin interface (with a different IP than that of the firewall 1) connect the two machines and start firewall 2? Should I use the same hostnames for both machines?

Your help would be appreciated! [:)]

Thanks in advance.
Alexander  


This thread was automatically locked due to age.
Parents
  • 0
    1) Yes that should work. But I recommend you to use a separate NIC for HA. Sometimes there are problems by using a dual-port-NIC with HA. But normally it should work.

    2) Setup the Master completly. The slave needs an IP (for accessing the Webadmin) and the HA-configuration. Everything else will be syncronized automaticaly.

    Cheers
    Xeno  
  • 0 in reply to Xeno
    Thanks for this information!

    Regards
    Alexander  
Reply Children
No Data
Cookie Information Banner