This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Please Help Me

I installed Astaro 4.0 not too long ago, I have 2 NIC eth0 ip=192.168.1.105, eth1 ip=192.168.1.106, my admin station ip=192.168.1.105 all with subnetmask of 255.255.255.0. After installation I am was able to connect to web admin, but few minutes later is just timed out and now I can access it. Can somebody help me please

Thanks

This thread was automatically locked due to age.

Parents

0 MatthiasStapf over 22 years ago

Hi Pluto,

>I have 2 NIC
>eth0 ip=192.168.1.105
>eth1 ip=192.168.1.106
>my admin station ip=192.168.1.105

i think you have duplicate IP's on the wire :-))

bye

Matthias
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 MatthiasStapf over 22 years ago

Hi Pluto,

>I have 2 NIC
>eth0 ip=192.168.1.105
>eth1 ip=192.168.1.106
>my admin station ip=192.168.1.105

i think you have duplicate IP's on the wire :-))

bye

Matthias
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 Pluto over 22 years ago in reply to MatthiasStapf

Actually my admin is 192.168.1.107 and still doesn 't work. I did the ./httpd restart command and that didn't help either. I am about to give up.
Cancel
Vote Up 0 Vote Down

Cancel
0 MatthiasStapf over 22 years ago in reply to Pluto

Hi Pluto,

is ther a special reason, why there IP's from the same Subnet are on both NIC's ?

may be this could also be a problem

bye

Matthias
Cancel
Vote Up 0 Vote Down

Cancel
0 suse over 22 years ago in reply to MatthiasStapf

[ QUOTE ]
Hi Pluto,

is ther a special reason, why there IP's from the same Subnet are on both NIC's ?

may be this could also be a problem

bye

Matthias

[/ QUOTE ]

I think this maybe cause problem
Cancel
Vote Up 0 Vote Down

Cancel
0 Tails over 22 years ago in reply to suse

It really doesn't make any sense to have both interfaces on the same subnet, this could be one of your problems. Try putting one interface on one subnet and the other on the same subnet as your admin station.

Tails
Cancel
Vote Up 0 Vote Down

Cancel
0 karabela over 22 years ago in reply to Tails

besides the subnet also check that there not connected on the same hub.
Cancel
Vote Up 0 Vote Down

Cancel
0 Udo_Seiler over 22 years ago in reply to karabela

Hi,

when I read your config there is something wrong:
Your admin Station has the same IP (192.168.1.105) as the internal Interface of the Astaro eth0 (192.168.1.105).
This will never work!

Kind Regards

Udo Seiler
Cancel
Vote Up 0 Vote Down

Cancel
0 Pluto over 22 years ago in reply to Udo_Seiler

Thank you all for the help, I did indeed had both eth on the same subnet .

Thanks
Cancel
Vote Up 0 Vote Down

Cancel