Hi Board,
HEELP !! I just updated my very-well running astaro 4.007 to
4.008 and now it boots up normally and the network is
running, too. BUT: The Network is slow like hell and at the
screen with the network interfaces in the admin console it says "unkown vendor" on all network cards. the cards are
Intel chipset 10/100 and were shown OK in the 4.007 version.
Added at 21:47 GER TIME:
the very very strange thing is the card is WORKING but
slow like hell. I get ping times of 2000 and more and very often ping-timeouts. It is a 3port Intel 10/100.
Kernel Log schows THIS at bootup:
netfilter PSD unloaded - (c) astaro AG
Jun 25 19:39:01 (none) kernel: Kernel logging (proc) stopped.
Jun 25 19:39:01 (none) kernel: Kernel log daemon terminating.
Jun 25 19:42:57 (none) kernel: klogd 1.3-3, log source = /proc/kmsg started.
Jun 25 19:42:57 (none) kernel: Cannot open map file: /System.map.
Jun 25 19:42:57 (none) kernel: Loaded 78 symbols from 3 modules.
Jun 25 19:42:58 (none) kernel: Intel(R) PRO/100 Network Driver - version 2.1.29
Jun 25 19:42:58 (none) kernel: Copyright (c) 2002 Intel Corporation
Jun 25 19:42:58 (none) kernel:
Jun 25 19:42:58 (none) kernel: e100: selftest OK.
Jun 25 19:42:58 (none) kernel: e100: eth0: Intel(R) 8255x-based Ethernet Adapter
Jun 25 19:42:58 (none) kernel: Hardware receive checksums disabled
Jun 25 19:42:58 (none) kernel: cpu cycle saver enabled
Jun 25 19:42:58 (none) kernel:
Jun 25 19:42:58 (none) kernel: e100: selftest OK.
Jun 25 19:42:58 (none) kernel: e100: eth1: Intel(R) 8255x-based Ethernet Adapter
Jun 25 19:42:58 (none) kernel: Hardware receive checksums disabled
Jun 25 19:42:58 (none) kernel: cpu cycle saver enabled
Jun 25 19:42:58 (none) kernel:
Jun 25 19:43:01 (none) kernel: e100: selftest OK.
Jun 25 19:43:01 (none) kernel: e100: eth2: Intel(R) 8255x-based Ethernet Adapter
Jun 25 19:43:01 (none) kernel: Hardware receive checksums disabled
Jun 25 19:43:01 (none) kernel: cpu cycle saver enabled
Jun 25 19:43:01 (none) kernel:
Jun 25 19:43:04 (none) kernel: e100: selftest OK.
Jun 25 19:43:04 (none) kernel: e100: eth3: Intel(R) PRO/100 S Server Adapter
Jun 25 19:43:04 (none) kernel: Hardware receive checksums enabled
Jun 25 19:43:04 (none) kernel: cpu cycle saver enabled
Jun 25 19:43:04 (none) kernel:
Jun 25 19:43:07 (none) kernel: e100: selftest OK.
Jun 25 19:43:07 (none) kernel: e100: eth4: Intel(R) PRO/100 S Server Adapter
Jun 25 19:43:07 (none) kernel: Hardware receive checksums enabled
Jun 25 19:43:07 (none) kernel: cpu cycle saver enabled
Jun 25 19:43:07 (none) kernel:
Jun 25 19:43:08 (none) kernel: usb.c: registered new driver usbdevfs
Jun 25 19:43:08 (none) kernel: usb.c: registered new driver hub
Jun 25 19:43:08 (none) kernel: usb.c: registered new driver hiddev
Jun 25 19:43:08 (none) kernel: usb.c: registered new driver hid
Jun 25 19:43:08 (none) kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik
Jun 25 19:43:08 (none) kernel: hid-core.c: USB HID support drivers
Jun 25 19:43:12 (none) kernel: ip_tables: (C) 2000-2002 Netfilter core team
Jun 25 19:43:12 (none) kernel: ip_conntrack version 2.1 (8192 buckets, 65536 max) - 320 bytes per conntrack
Jun 25 19:43:15 (none) kernel: Linux PCMCIA Card Services 3.2.1
Jun 25 19:43:15 (none) kernel: kernel build: 2.4.19-C2_31 unknown
Jun 25 19:43:15 (none) kernel: options: [pci] [cardbus]
Jun 25 19:43:15 (none) kernel: Intel ISA/PCI/CardBus PCIC probe:
Jun 25 19:43:15 (none) kernel: no bridges found.
Jun 25 19:43:15 (none) kernel: ds: no socket drivers loaded!
Jun 25 19:43:21 (none) kernel: e100: eth1 NIC Link is Up 100 Mbps Full duplex
Jun 25 19:43:22 (none) kernel: e100: eth0 NIC Link is Up 100 Mbps Full duplex
Jun 25 19:43:22 (none) kernel: CSLIP: code copyright 1989 Regents of the University of California
Jun 25 19:43:22 (none) kernel: PPP generic driver version 2.4.2
Jun 25 19:43:22 (none) kernel: PPP MPPE Compression module registered
Jun 25 19:43:22 (none) kernel: PPP Deflate Compression module registered
Jun 25 19:43:22 (none) kernel: PPP BSD Compression module registered
Jun 25 19:43:27 (none) kernel: netfilter PSD loaded - (c) astaro AG
Jun 25 19:43:32 (none) kernel: klips_info:ipsec_init: KLIPS startup, FreeS/WAN IPSec version: super-freeswan-1.99.6.1
Jun 25 19:43:32 (none) kernel: klips_info:ipsec_alg_init: KLIPS alg v=0.8.1-0 (EALG_MAX=255, AALG_MAX=15)
Jun 25 19:43:32 (none) kernel: klips_info:ipsec_alg_init: calling ipsec_alg_static_init()
Jun 25 19:43:32 (none) kernel: ipsec_3des_init(alg_type=15 alg_id=3 name=3des): ret=0
Jun 25 19:43:32 (none) kernel: ipsec_aes_init(alg_type=15 alg_id=12 name=aes): ret=0
Jun 25 19:43:32 (none) kernel: klips_debug: experimental ipsec_alg_AES_MAC not registered [Ok] (auth_id=0)
Jun 25 19:43:32 (none) kernel: ipsec_blowfish_init(alg_type=15 alg_id=7 name=blowfish): ret=0
Jun 25 19:43:32 (none) kernel: ipsec_twofish_init(alg_type=15 alg_id=253 name=twofish): ret=0
Jun 25 19:43:32 (none) kernel: ipsec_md5_init(alg_type=14 alg_id=2 name=md5): ret=0
Jun 25 19:43:32 (none) kernel: ipsec_sha1_init(alg_type=14 alg_id=3 name=sha1): ret=0
Jun 25 19:43:32 (none) kernel: ipsec_sha2_init(alg_type=14 alg_id=5 name=sha2_256): ret=0
Jun 25 19:43:32 (none) kernel: ipsec_sha2_init(alg_type=14 alg_id=7 name=sha2_512): ret=0
Jun 25 19:43:32 (none) kernel: ipsec_serpent_init(alg_type=15 alg_id=252 name=serpent): ret=0
Jun 25 19:43:32 (none) kernel: ipsec_null_init(alg_type=15 alg_id=11 name=null): ret=0
The 8255X ones is the 3port adapter. The 2 10/100SPROs
are internal on board.
PLEASE help me.
regards
Jörg
This thread was automatically locked due to age.
