This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

WLAN-AP mit ASL 4.003

Hi everybody !!
It's me again; still having troubles getting the WLAN-AP up and running. I've the kernel-logs from the boot sequenze (WLAN-station & WLAN-AP) attached - any hints ?????

+++++++++++++++++++ WLAN - Station  +++++++++++++++++++++++++++

: klogd 1.3-3, log source = /proc/kmsg started.
: Cannot open map file: /System.map.
: Loaded 98 symbols from 3 modules.
: Intel(R) PRO/100 Network Driver - version 2.1.29
: Copyright (c) 2002 Intel Corporation
:
: PCI: Found IRQ 10 for device 00:03.0
: PCI: Sharing IRQ 10 with 00:02.2
: e100: selftest OK.
: e100: eth0: Intel(R) 8255x-based Ethernet Adapter
:
: rtl8139.c:v1.20 6/21/2002 Donald Becker, becker@scyld.com.
:  http://www.scyld.com/network/rtl8139.html
: eth1: RealTek RTL8139C Fast Ethernet at 0x7800, IRQ 9, 00:48:54[:D]1:a7:57.
: usb.c: registered new driver usbdevfs
: usb.c: registered new driver hub
: usb.c: registered new driver hiddev
: usb.c: registered new driver hid
: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik
: hid-core.c: USB HID support drivers
: ip_tables: (C) 2000-2002 Netfilter core team
: ip_conntrack version 2.1 (8192 buckets, 65536 max) - 320 bytes per conntrack
: Linux PCMCIA Card Services 3.2.1
:   kernel build: 2.4.19-C2_23 #2 Wed Jan 22 10:29:32 CET 2003
:   options:  [pci] [cardbus]
: Intel ISA/PCI/CardBus PCIC probe:
: PCI: Enabling device 00:10.0 (0000 -> 0002)
: PCI: Assigned IRQ 5 for device 00:10.0
:   Ricoh RL5C475 rev 80 PCI-to-CardBus at slot 00:10, mem 0xf3eff000
:     host opts [0]: [pci only] [io 3/6/1] [mem 3/6/1] [pci irq 5] [lat 168/176] [bus 2/5]
:     PCI card interrupts, PCI status changes
: cs: memory probe 0xa0000000-0xa0ffffff: clean.
: init_module: prism2_cs.o: 0.1.15 Loaded
: init_module: dev_info is: prism2_cs
: cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x388-0x38f 0x3b8-0x3df 0x4d0-0x4d7
: cs: IO port probe 0x0230-0x0387: clean.
: cs: IO port probe 0x0390-0x03b7: clean.
: cs: IO port probe 0x03e0-0x04cf: clean.
: cs: IO port probe 0x04d8-0x04ff: clean.
: cs: IO port probe 0x0800-0x08ff: clean.
: cs: IO port probe 0x0c00-0x0cff: clean.
: prism2_cs: index 0x01: Vcc 3.3, irq 5, io 0x0100-0x013f
: ident: nic h/w: id=0x800c 1.0.0
: ident: pri f/w: id=0x15 1.0.7
: ident: sta f/w: id=0x1f 1.3.5
: MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1
: CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1
: PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=4/4
: STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/9
: PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
: STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
: STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1
: Prism2 card SN: 99SA01000000
: dot11req_reset: the macaddress and setdefaultmib arguments are currently unsupported.
: e100: eth0 NIC Link is Up 100 Mbps Full duplex
: netfilter PSD loaded - (c) astaro AG
: ident: nic h/w: id=0x800c 1.0.0
: ident: pri f/w: id=0x15 1.0.7
: ident: sta f/w: id=0x1f 1.3.5
: MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1
: CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1
: PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=4/4
: STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/9
: PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
: STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
: STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1
: Prism2 card SN: 99SA01000000

+++++++++++++++++++++ up & running   ++++++++++++++++++++++

to be continued %

This thread was automatically locked due to age.

Parents

0 ehudler over 22 years ago

******************  WLAN - AP  ******************************
: klogd 1.3-3, log source = /proc/kmsg started.
: Cannot open map file: /System.map.
: Loaded 98 symbols from 3 modules.
: Intel(R) PRO/100 Network Driver - version 2.1.29
: Copyright (c) 2002 Intel Corporation
:
: PCI: Found IRQ 10 for device 00:03.0
: PCI: Sharing IRQ 10 with 00:02.2
: e100: selftest OK.
: e100: eth0: Intel(R) 8255x-based Ethernet Adapter
:
: rtl8139.c:v1.20 6/21/2002 Donald Becker, becker@scyld.com.
:  http://www.scyld.com/network/rtl8139.html
: eth1: RealTek RTL8139C Fast Ethernet at 0x7800, IRQ 9, 00:48:54[:D]1:a7:57.
: usb.c: registered new driver usbdevfs
: usb.c: registered new driver hub
: usb.c: registered new driver hiddev
: usb.c: registered new driver hid
: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik
: hid-core.c: USB HID support drivers
: ip_tables: (C) 2000-2002 Netfilter core team
: ip_conntrack version 2.1 (8192 buckets, 65536 max) - 320 bytes per conntrack
: Linux PCMCIA Card Services 3.2.1
:   kernel build: 2.4.19-C2_23 #2 Wed Jan 22 10:29:32 CET 2003
:   options:  [pci] [cardbus]
: Intel ISA/PCI/CardBus PCIC probe:
: PCI: Enabling device 00:10.0 (0000 -> 0002)
: PCI: Assigned IRQ 5 for device 00:10.0
:   Ricoh RL5C475 rev 80 PCI-to-CardBus at slot 00:10, mem 0xf3eff000
:     host opts [0]: [pci only] [io 3/6/1] [mem 3/6/1] [pci irq 5] [lat 168/176] [bus 2/5]
:     PCI card interrupts, PCI status changes
: cs: memory probe 0xa0000000-0xa0ffffff: clean.
: init_module: prism2_cs.o: 0.1.15 Loaded
: init_module: dev_info is: prism2_cs
: cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x388-0x38f 0x3b8-0x3df 0x4d0-0x4d7
: cs: IO port probe 0x0230-0x0387: clean.
: cs: IO port probe 0x0390-0x03b7: clean.
: cs: IO port probe 0x03e0-0x04cf: clean.
: cs: IO port probe 0x04d8-0x04ff: clean.
: cs: IO port probe 0x0800-0x08ff: clean.
: cs: IO port probe 0x0c00-0x0cff: clean.
: prism2_cs: index 0x01: Vcc 3.3, irq 5, io 0x0100-0x013f
: ident: nic h/w: id=0x800c 1.0.0
: ident: pri f/w: id=0x15 1.0.7
: ident: sta f/w: id=0x1f 1.3.5
: MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1
: CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1
: PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=4/4
: STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/9
: PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
: STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
: STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1
: Prism2 card SN: 99SA01000000
: dot11req_reset: the macaddress and setdefaultmib arguments are currently unsupported.
: e100: eth0 NIC Link is Up 100 Mbps Full duplex
: netfilter PSD loaded - (c) astaro AG
: ident: nic h/w: id=0x800c 1.0.0
: ident: pri f/w: id=0x15 1.0.7
: ident: sta f/w: id=0x1f 1.3.5
: MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1
: CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1
: PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=4/4
: STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/9
: PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
: STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
: STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1
: Prism2 card SN: 99SA01000000
: PDA Read from 0x007f0000 in NV space.
: Download 512 bytes to flash @0x3f0000
: Writing 512 bytes to flash @0x3f0000
: hfa384x_drvr_flashdl_write: download(NVWRITE,lo=0,hi=3f,len=200) cmd failed, result=-110. Aborting d/l
: hfa384x_docmd_wait: hfa384x_cmd timeout(1), reg=0xc000.
: hfa384x_docmd_wait: hfa384x_cmd timeout(1), reg=0xc000.
: hfa384x_drvr_start: Initialize command failed.
: hfa384x_drvr_start: Failed, result=-110
: prism2sta_ifstate: hfa384x_drvr_start() failed,result=-110
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 ehudler over 22 years ago

******************  WLAN - AP  ******************************
: klogd 1.3-3, log source = /proc/kmsg started.
: Cannot open map file: /System.map.
: Loaded 98 symbols from 3 modules.
: Intel(R) PRO/100 Network Driver - version 2.1.29
: Copyright (c) 2002 Intel Corporation
:
: PCI: Found IRQ 10 for device 00:03.0
: PCI: Sharing IRQ 10 with 00:02.2
: e100: selftest OK.
: e100: eth0: Intel(R) 8255x-based Ethernet Adapter
:
: rtl8139.c:v1.20 6/21/2002 Donald Becker, becker@scyld.com.
:  http://www.scyld.com/network/rtl8139.html
: eth1: RealTek RTL8139C Fast Ethernet at 0x7800, IRQ 9, 00:48:54[:D]1:a7:57.
: usb.c: registered new driver usbdevfs
: usb.c: registered new driver hub
: usb.c: registered new driver hiddev
: usb.c: registered new driver hid
: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik
: hid-core.c: USB HID support drivers
: ip_tables: (C) 2000-2002 Netfilter core team
: ip_conntrack version 2.1 (8192 buckets, 65536 max) - 320 bytes per conntrack
: Linux PCMCIA Card Services 3.2.1
:   kernel build: 2.4.19-C2_23 #2 Wed Jan 22 10:29:32 CET 2003
:   options:  [pci] [cardbus]
: Intel ISA/PCI/CardBus PCIC probe:
: PCI: Enabling device 00:10.0 (0000 -> 0002)
: PCI: Assigned IRQ 5 for device 00:10.0
:   Ricoh RL5C475 rev 80 PCI-to-CardBus at slot 00:10, mem 0xf3eff000
:     host opts [0]: [pci only] [io 3/6/1] [mem 3/6/1] [pci irq 5] [lat 168/176] [bus 2/5]
:     PCI card interrupts, PCI status changes
: cs: memory probe 0xa0000000-0xa0ffffff: clean.
: init_module: prism2_cs.o: 0.1.15 Loaded
: init_module: dev_info is: prism2_cs
: cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x388-0x38f 0x3b8-0x3df 0x4d0-0x4d7
: cs: IO port probe 0x0230-0x0387: clean.
: cs: IO port probe 0x0390-0x03b7: clean.
: cs: IO port probe 0x03e0-0x04cf: clean.
: cs: IO port probe 0x04d8-0x04ff: clean.
: cs: IO port probe 0x0800-0x08ff: clean.
: cs: IO port probe 0x0c00-0x0cff: clean.
: prism2_cs: index 0x01: Vcc 3.3, irq 5, io 0x0100-0x013f
: ident: nic h/w: id=0x800c 1.0.0
: ident: pri f/w: id=0x15 1.0.7
: ident: sta f/w: id=0x1f 1.3.5
: MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1
: CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1
: PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=4/4
: STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/9
: PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
: STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
: STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1
: Prism2 card SN: 99SA01000000
: dot11req_reset: the macaddress and setdefaultmib arguments are currently unsupported.
: e100: eth0 NIC Link is Up 100 Mbps Full duplex
: netfilter PSD loaded - (c) astaro AG
: ident: nic h/w: id=0x800c 1.0.0
: ident: pri f/w: id=0x15 1.0.7
: ident: sta f/w: id=0x1f 1.3.5
: MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1
: CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1
: PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=4/4
: STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/9
: PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
: STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
: STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1
: Prism2 card SN: 99SA01000000
: PDA Read from 0x007f0000 in NV space.
: Download 512 bytes to flash @0x3f0000
: Writing 512 bytes to flash @0x3f0000
: hfa384x_drvr_flashdl_write: download(NVWRITE,lo=0,hi=3f,len=200) cmd failed, result=-110. Aborting d/l
: hfa384x_docmd_wait: hfa384x_cmd timeout(1), reg=0xc000.
: hfa384x_docmd_wait: hfa384x_cmd timeout(1), reg=0xc000.
: hfa384x_drvr_start: Initialize command failed.
: hfa384x_drvr_start: Failed, result=-110
: prism2sta_ifstate: hfa384x_drvr_start() failed,result=-110
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data