This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

WLAN detection NoGo.

hi...

...purchased a dlink dwl-650 (not plus), together with the pcmcia adapter (ricoh RL5C475_II_ chipset), tested with this and an other adapter (texas PCI1410PGE chipset) and two different mainboards (intel 810e + celeron and sis 730s + duron - both boxes already working flawlessly with astaro and standard nics) sadly the 4.000 installer won't detect the dwl-650 - no way.

any idea / any help / any anything mucho appreciated - thanks in advance

bye...  


This thread was automatically locked due to age.
Parents
  • is there anything in /proc/bus/pccard/drivers ?
    if yes, can you see a wlan0 interface when doing an 'ifconfig -a' ?

    /marcel 
  • uh, you got me going there. linux novice as i am. but it pointed me to the fact that i have to do a full install prior seeing anything about a wlan nic... i thought the hardware detection at the beginning of the installation should show the card and didn't do any further... but at this point ifconfig clearly shows nothing soooo i thought twice & tried the installation. (and i rtfm - you should write that somewhere [:)]

    BUT near the end of the boot-sequence it states: pcmcia service start -> failed... the same if i start/stop the service from the console. though the kernel-log shows no problem and the wlan-card goes on/off on pcmcia start/stop. tried both adapters and different slots, but the only thing i get is:

    Down   WLAN (WaveLAN Access Point)
    on wlan0 (WaveLan hardware prism2 chipset )   ???.???.???.??? / ???.???.???.???
    Gateway: none 
      
      Hardware Device Overview 
       
      Sys ID   Name/Parameters   PCI Device ID   
      wlan0   WaveLan hardware prism2 chipset 
    irq=5   type=wlan  

    well...  
  • ...anything to tell on this? where to probe? what to look for? which piece to change? no? umm...    
Reply Children
No Data