This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Strange DSL problem with asl-3.209

I'm having some strange problems when using DSL:

Installing just fine, then logging on to webadmin to create a PPPoE (DSL) interface. After it is configured and up (so I entered everything correctly), the LAN interface goes down about half a minute later. It will come back after a short pause but will go down again repeatedly.

By looking at the logfiles, it seems the following is happening: Just before the LAN interface is deactivated, the PPPoE daemon sends a PADT message, thereby terminating the DSL connection on my end. Then all services are restarted (ipsec, named, pppoe, maybe others) and after that the LAN interface works again.

When I do not add my DSL interface, the LAN interface works flawlessly. I also have tried different NICs (Intel, Tulip, Realtek, SMC) with varying LAN/DSL combinations, but to no avail.

There is no sign of "SPOOF" in the logfiles, so I'd really appreciate your help on this problem.


This thread was automatically locked due to age.
Parents
  • > I also have tried different NICs (Intel, Tulip, Realtek, SMC) with varying LAN/DSL combinations.

    Do you have the same problem when you use "Standard ethernet interface" instead of "PPP over Ethernet interface"?

    Farid
Reply
  • > I also have tried different NICs (Intel, Tulip, Realtek, SMC) with varying LAN/DSL combinations.

    Do you have the same problem when you use "Standard ethernet interface" instead of "PPP over Ethernet interface"?

    Farid
Children