This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

3.202 comes and goes...

Hello all.  Hopefully someone can help me with this one...

I have recently installed 3.202 and have had flaky internet connectivity issues with the exteral interface.  Sometime it is available from the outside, sometimes it is not.  Sometimes I can VPN, ping, HTTPS to administer it, other times I cannot and it appears to be random.

I have no connectivity issues on the internal network, the firewall is always reachable.

I have checked with my ISP and they say everyting is fine on their side.  But I expected that.

Has anyone had similar problems?


This thread was automatically locked due to age.
Parents
  • check the kernel log for IP-Spoofing and in the WebAdmin-Reporting->Network for errors on this interface.
  • Still   [:(]  

    I checked to be sure there were no errors on the NIC and no SPOOF entries in the KERNEL logs.

    More info about the system's config...

    Cyrix MII/333 processor, don't know motheboard.
    128mb RAM
    6.4gb HD
    Internal interface, IntelPro 100 NIC
    External interface, 3Com 3c905c

    I did have a SMC net card but replaced it with the 3Com and the problem persists.

    Anything else?
  • I'm pretty sure you allready did this, but ...
    Did you check the network cable?
    Maybe it has a slack joint!?
     
     [size="1"][ 02 August 2002, 08:02: Message edited by: f3@Rl3SS ][/size]
  • Keefers,

    remove default gateways on all interfaces except
    teh external one. Remove QoS settings in case
    you run a DSL machine.

    read you
    o|iver
  • Hello all;

    I had no QoS settings, but I did have a default gateway for the internal network.  I removed it and that solved the problem.

    Thanks Oliver for your suggestion.

    Keith
  • hi there,

    I'm using the ASL 3.202 on my server machine. I got the similar problem with keefers'.When I first setup the admin interface, everything is working fine. I configured all the options that I need on my network. Then I setup the external IP which is a public IP. After that I got the IP spoofing problem. When I use the Webadmin to continue configuring the firewall, it will kick me out the connection after a certain period. Then I try to ping the firewall, it failed. So I have to open the firewall terminal to ping back my workstation. After I can ping my workstation again, the connection will become normal. But it will happen again later on... What can I do with that?...Is that a problem the public interface and internal interface are on the same switch during the testing process??....And do I need to assign the firewall's internal IP as the default gateway on all of my workstations? Please help...!

    Gary
Reply
  • hi there,

    I'm using the ASL 3.202 on my server machine. I got the similar problem with keefers'.When I first setup the admin interface, everything is working fine. I configured all the options that I need on my network. Then I setup the external IP which is a public IP. After that I got the IP spoofing problem. When I use the Webadmin to continue configuring the firewall, it will kick me out the connection after a certain period. Then I try to ping the firewall, it failed. So I have to open the firewall terminal to ping back my workstation. After I can ping my workstation again, the connection will become normal. But it will happen again later on... What can I do with that?...Is that a problem the public interface and internal interface are on the same switch during the testing process??....And do I need to assign the firewall's internal IP as the default gateway on all of my workstations? Please help...!

    Gary
Children
No Data