This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

I can't access to internet as client of my server

Hi

I have an ASL firewall 3.200 installed and it work right, but I can't connect to internet as client of the server connected to the internal NIC of the firewall.

I have the next configuration:

External NIC:
eth1
IP 217.xxx.xxx.12
netmask 255.255.255.192
gateway 217.xxx.xxx.1

DMZ ( Thanks Ørjan ):
eth2
IP 192.168.3.1
netmask 255.255.255.0

Internal NIC:
eth0
IP 192.168.2.1
netmak 255.255.255.0

I have connected to this NIC a switch_1 and connected to this switch_1 I have a W2000 server with two NIC's

1st NIC connected to the firewall:
IP 192.168.2.2
netmask 255.255.255.0
gateway 192.168.2.1

2nd NIC connected to other switch_2:
IP 192.168.100.1
netmask 255.255.255.0
gateway 192.168.2.1

I can connect to internet from this W2000 server without any problem.

Connected to this switch_2 I have a PC W2000 Pro with the next configuration:

IP 192.168.100.2
netmask 255.255.255.0
gateway 192.168.100.1 ( or to try 192.168.2.1 )

The net with the W2000 server hasn't any problem but I can't connect to internet from this PC.

I have:

Masquerading:
Private_network_192.168.0.0 -> External_interface

Packet Filter -> Rules:
any any any allow ( to try )

Anyone know why can't I connect to internet from that PC ?

Many Thanks

Jaume

[ 31 May 2002: Message edited by: Jaume ]

This thread was automatically locked due to age.