Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 2 subscribers
  • Views 1271 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Reporting - Network Graphs Frozen

Tim Rosenquist
How can one jump start the network graph reporting?  For some reason my two interfaces are frozen.  It seemed to happen after performing the up2date patches.  I have even gone so far as to backup my configuration, rebuild, repatch, and restore.  Once again though the graphs are frozen in time just as they were before I applied the up2date patches.

Thanks,
Tim.


This thread was automatically locked due to age.
Parents
  • 0
    Same here, the newest Up2Date is not working with the network stats.  Anyone have any ideas on this?  Thanks.

    notoriousiroc
  • 0 in reply to notoriousiroc
    I got the same problem here. I found that is has something to do with SNMP. I got the following response after executing mrtg by hand:

    SNMP Error:
    no response received
    SNMPv1_Session (remote host: "localhost" [127.0.0.1].3401
                      community: "public"
                     request ID: 1545245534
                    PDU bufsize: 8000 bytes
                        timeout: 2s
                        retries: 5
                        backoff: 1)
    SNMPGET Problem for 1.3.6.1.4.1.3495.1.3.1.7 1.3.6.1.4.1.3495.1.3.1.7 on public@
    localhost:3401
    SNMPGET: Failed to reach target: "1.3.6.1.4.1.3495.1.3.1.7&1.3.6.1.4.1.3495.1.3.
    1.7   ublic@localhost:3401". I tried multiple times!
    SNMP Error:
    no response received
    SNMPv1_Session (remote host: "localhost" [127.0.0.1].3401
                      community: "public"
                     request ID: 1545245535
                    PDU bufsize: 8000 bytes
                        timeout: 2s
                        retries: 5
                        backoff: 1)
    SNMPGET Problem for 1.3.6.1.4.1.3495.1.3.2.2.1.10.5 1.3.6.1.4.1.3495.1.3.2.2.1.1
    0.5 on public@localhost:3401
    SNMPGET: Failed to reach target: "1.3.6.1.4.1.3495.1.3.2.2.1.10.5&1.3.6.1.4.1.34
    95.1.3.2.2.1.10.5   ublic@localhost:3401". I tried multiple times!
    SNMP Error:
    no response received
    SNMPv1_Session (remote host: "localhost" [127.0.0.1].3401
                      community: "public"
                     request ID: 1545245536
                    PDU bufsize: 8000 bytes
                        timeout: 2s
                        retries: 5
                        backoff: 1)
    SNMPGET Problem for 1.3.6.1.4.1.3495.1.3.2.2.1.9.5 1.3.6.1.4.1.3495.1.3.2.2.1.9.
    5 on public@localhost:3401
    SNMPGET: Failed to reach target: "1.3.6.1.4.1.3495.1.3.2.2.1.9.5&1.3.6.1.4.1.349
    5.1.3.2.2.1.9.5   ublic@localhost:3401". I tried multiple times!

    Does anybody have an idea. I thing it something to do with version 2.023.
Reply
  • 0 in reply to notoriousiroc
    I got the same problem here. I found that is has something to do with SNMP. I got the following response after executing mrtg by hand:

    SNMP Error:
    no response received
    SNMPv1_Session (remote host: "localhost" [127.0.0.1].3401
                      community: "public"
                     request ID: 1545245534
                    PDU bufsize: 8000 bytes
                        timeout: 2s
                        retries: 5
                        backoff: 1)
    SNMPGET Problem for 1.3.6.1.4.1.3495.1.3.1.7 1.3.6.1.4.1.3495.1.3.1.7 on public@
    localhost:3401
    SNMPGET: Failed to reach target: "1.3.6.1.4.1.3495.1.3.1.7&1.3.6.1.4.1.3495.1.3.
    1.7   ublic@localhost:3401". I tried multiple times!
    SNMP Error:
    no response received
    SNMPv1_Session (remote host: "localhost" [127.0.0.1].3401
                      community: "public"
                     request ID: 1545245535
                    PDU bufsize: 8000 bytes
                        timeout: 2s
                        retries: 5
                        backoff: 1)
    SNMPGET Problem for 1.3.6.1.4.1.3495.1.3.2.2.1.10.5 1.3.6.1.4.1.3495.1.3.2.2.1.1
    0.5 on public@localhost:3401
    SNMPGET: Failed to reach target: "1.3.6.1.4.1.3495.1.3.2.2.1.10.5&1.3.6.1.4.1.34
    95.1.3.2.2.1.10.5   ublic@localhost:3401". I tried multiple times!
    SNMP Error:
    no response received
    SNMPv1_Session (remote host: "localhost" [127.0.0.1].3401
                      community: "public"
                     request ID: 1545245536
                    PDU bufsize: 8000 bytes
                        timeout: 2s
                        retries: 5
                        backoff: 1)
    SNMPGET Problem for 1.3.6.1.4.1.3495.1.3.2.2.1.9.5 1.3.6.1.4.1.3495.1.3.2.2.1.9.
    5 on public@localhost:3401
    SNMPGET: Failed to reach target: "1.3.6.1.4.1.3495.1.3.2.2.1.9.5&1.3.6.1.4.1.349
    5.1.3.2.2.1.9.5   ublic@localhost:3401". I tried multiple times!

    Does anybody have an idea. I thing it something to do with version 2.023.
Children