Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Complete new Hardware, will Backup work ?

Got complete new Hardware for the UTM 9

Intel Board, Core i3 , till now 2 Intel Ct Gigabit desktop adapter 3 is on the way.

The question is: what happens, if i make a fresh install and then import a backup ?

What happens to the interfaces ?

Will an Intel NIC  Intel I350-T2 I350AM2 Chip, Dual RJ45 Port

work with the utm 9 ?



This thread was automatically locked due to age.
Parents
  • Hallo Wolfgang,

    When you change to different interface cards, you will likely have to move cables because the NICs are numbered differently.  Other than that, you should be fine.

    There is no longer an official Sophos HCL for the UTM, but the XG HCL is 99% the same for UTM.  You might want to consult the last entries in the *Unofficial* Hardware Compatibility List (HCL) here.  Also, see #7.8 in Rulz (last updated 2021-02-16).

    Cheers - Bob

    Updated 2021-06-08

  • Hi Bob,

    Thanks for ur answer.

    well that did not work.

    I got  a new motherboard, new CPU , new RAM and new NIC's .

    After i installed the UTM from iso 7.503 and updated to the latest 7.609, the nics are fine.

    after i import my backup from the old (hardware i use) UTM 9 and reboot, the nics are dead.  no interface is coming up, no link, no nothing.

    regadless what new nic i try.

    after the backup i checked the modules and the modules of the nics are loaded ( all intel) , i have no idea why the nic's won't come up.

  • I see that my link to the Sophos HCL doesn't work anymore, Wolfgang.

    How about a picture from the 'Hardware' tab in 'Interfaces'?

    Cheers - Bob

Reply Children