Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

high availability status UNLINKED every time I try to set it up

hi, I'm trying to set up an HA but every time  it starts syncing then end up with an UNLINKED status 

this is the guide I followed, and this is the solution I tried so far still not working

this is the master configuration


and this is the slave configuration



this is how my configuration is setup

 



This thread was automatically locked due to age.
Parents
  • There are some problems ... i think.

    1. The HA interface must be the same at booth firewalls.

    2. The corresponding interfaces at booth Firewall-Nodes must connect to the same Layer2 Network/Subnet (mostly)

    3. The SG-Nodes share the same MAC/IP-address for the non-HA-Interfaces

Reply
  • There are some problems ... i think.

    1. The HA interface must be the same at booth firewalls.

    2. The corresponding interfaces at booth Firewall-Nodes must connect to the same Layer2 Network/Subnet (mostly)

    3. The SG-Nodes share the same MAC/IP-address for the non-HA-Interfaces

Children