Guest User!

You are not Sophos Staff.

Thread Info
  • Locked Locked
  • Replies 18 replies
  • Subscribers 2 subscribers
  • Views 44819 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Precaution on Update 9.351 (FTP)

HiRN

Hi folks,


I don't want to blame Sophos, this is just a precaution for people updating from the FTP to version 9.351. I have some massive problems but I do not know where they come from.

First, Interfaces take up to five minutes until the are pingable and allow traffic (timeouts), same problem with some IPsec tunnels, going up, pinging the remote site hosts is possible, then going to timeouts.

And further an AP50 doesn't get an connection to the UTM anymore.

HA cluster (active passive) problem. First I thoight its broken completely, since I now know, interfaces take a long time to get up, so this is maybe the reason for some strange HA cluster behaviour.

This behaviour is on two HA clusters (which I disabled for now) on VMware 6.0 Update 1a and wasn't there with 9.350.

So when you update, be aware you could have problems. Trying to get a clue on this.



This thread was automatically locked due to age.
Parents
  • Another report back, the issue with taking a long time until the interfaces are up is still there. Meanwhile I updated an UTM220 to 9.350 and then 9.351, no issues. Also a virtual software UTM (running on ESXI 5.5 U3), no issues. So, this is maybe a problem with my both software UTM running on ESXi 6.0 U1, and not a general problem with the 9.351.

    Administrating:

    • 2x UTM Software HA-Clusters (Active-Passive), Enthusiast Home Lab
    • 1x UTM525 HA-Cluster (Active-Passive), Full Guard, 6x AP15, 2x AP30, 40x RED10, 1x RED50
    • 1x SG230, Full Guard, 6x AP10, 1x AP15
    • 1x UTM220, Full Guard, 16x AP10
    • 1x UTM220, Full Guard
Reply
  • Another report back, the issue with taking a long time until the interfaces are up is still there. Meanwhile I updated an UTM220 to 9.350 and then 9.351, no issues. Also a virtual software UTM (running on ESXI 5.5 U3), no issues. So, this is maybe a problem with my both software UTM running on ESXi 6.0 U1, and not a general problem with the 9.351.

    Administrating:

    • 2x UTM Software HA-Clusters (Active-Passive), Enthusiast Home Lab
    • 1x UTM525 HA-Cluster (Active-Passive), Full Guard, 6x AP15, 2x AP30, 40x RED10, 1x RED50
    • 1x SG230, Full Guard, 6x AP10, 1x AP15
    • 1x UTM220, Full Guard, 16x AP10
    • 1x UTM220, Full Guard
Children
No Data
Unfiltered HTML