Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 6 replies
  • Answers 1 answer
  • Subscribers 3 subscribers
  • Views 10629 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

VDSL auf vlan8 - Hifle

tracert

Hallo,

mein neuer VDSL Provider hat PPPOE für VDSL auf Vlan8 laufen.

Wie bekomme ich die UTM dazu dieses vlan für PPPOE zu verwenden (Mit dem Häkchen bei VDSL geht es ja nur auf vlan7)

Besten Dank



This thread was automatically locked due to age.
Parents
  • 0

    Interface bearbeiten -> Advanced -> VLAN Tag?

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
  • 0 in reply to scorpionking

    Hi Scorpionking,

    wäre schön, wenn es so funktionieren würde.

    Für PPPOE Interfaces gibt es diese Möglichkeit aber leider nicht.

    Optionen unter Advanced:

    MTU, Default route metric, Daily reconnect, Reconnect delay, Asymmetric, displayed max und multilink

    LG

    tr4c3rt

  • 0 in reply to tracert

    Natürlich gibt es die, musst halt den Haken bei VDSL setzen...

    Ggf. danach die MTU wieder auf 1492 hochsetzen.

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
  • 0 in reply to scorpionking

    Besten Dank, da war ich wohl einfach ziemlich blind [:S]

    Gerade umgestellt, läuft Sahne!

  • 0 in reply to tracert

    Gerne, freut mich, dass es läuft. [:)]

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
  • 0 in reply to scorpionking

    Korrektur, es funktioniert doch nicht.

    Die PPPOE Einwahl geht einfach nicht raus.

    Das Modem ist ein Allnet ALL126AS, der Anschluss von 1und1.

    Das Modem ist in Ordnung und syncht, an einem zweiten VDSL Anschluss direkt von der DTAG funktioniert Alles bestens.

    2016:03:07-18:39:42 tr4c3rt pppd-pppoe[9752]: Plugin rp-pppoe.so loaded.
    2016:03:07-18:39:42 tr4c3rt pppd-pppoe[9752]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.6
    2016:03:07-18:39:42 tr4c3rt pppd-pppoe[9752]: pppd 2.4.6 started by root, uid 0
    2016:03:07-18:39:42 tr4c3rt pppd-pppoe[9752]: Send PPPOE Discovery V1T1 PADI session 0x0 length 12
    2016:03:07-18:39:42 tr4c3rt pppd-pppoe[9752]: dst ff:ff:ff:ff:ff:ff src 0:c:29:49:ee:51
    2016:03:07-18:39:42 tr4c3rt pppd-pppoe[9752]: [service-name] [host-uniq 18 26 00 00]
    2016:03:07-18:39:47 tr4c3rt pppd-pppoe[9752]: Send PPPOE Discovery V1T1 PADI session 0x0 length 12
    2016:03:07-18:39:47 tr4c3rt pppd-pppoe[9752]: dst ff:ff:ff:ff:ff:ff src 0:c:29:49:ee:51
    2016:03:07-18:39:47 tr4c3rt pppd-pppoe[9752]: [service-name] [host-uniq 18 26 00 00]
    2016:03:07-18:39:57 tr4c3rt pppd-pppoe[9752]: Send PPPOE Discovery V1T1 PADI session 0x0 length 12
    2016:03:07-18:39:57 tr4c3rt pppd-pppoe[9752]: dst ff:ff:ff:ff:ff:ff src 0:c:29:49:ee:51
    2016:03:07-18:39:57 tr4c3rt pppd-pppoe[9752]: [service-name] [host-uniq 18 26 00 00]
    2016:03:07-18:40:17 tr4c3rt pppd-pppoe[9752]: Timeout waiting for PADO packets
    2016:03:07-18:40:17 tr4c3rt pppd-pppoe[9752]: Unable to complete PPPoE Discovery
    2016:03:07-18:40:17 tr4c3rt pppd-pppoe[9752]: Exit.
    2016:03:07-18:40:17 tr4c3rt pppoe-sh: DSL connection time shorter than 60 seconds (35 sec): Error? - wait 60 seconds

    Hat Jemand eine Idee warum ich nicht zu den PPPOE Servern durchkomme?

Reply
  • 0 in reply to scorpionking

    Korrektur, es funktioniert doch nicht.

    Die PPPOE Einwahl geht einfach nicht raus.

    Das Modem ist ein Allnet ALL126AS, der Anschluss von 1und1.

    Das Modem ist in Ordnung und syncht, an einem zweiten VDSL Anschluss direkt von der DTAG funktioniert Alles bestens.

    2016:03:07-18:39:42 tr4c3rt pppd-pppoe[9752]: Plugin rp-pppoe.so loaded.
    2016:03:07-18:39:42 tr4c3rt pppd-pppoe[9752]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.6
    2016:03:07-18:39:42 tr4c3rt pppd-pppoe[9752]: pppd 2.4.6 started by root, uid 0
    2016:03:07-18:39:42 tr4c3rt pppd-pppoe[9752]: Send PPPOE Discovery V1T1 PADI session 0x0 length 12
    2016:03:07-18:39:42 tr4c3rt pppd-pppoe[9752]: dst ff:ff:ff:ff:ff:ff src 0:c:29:49:ee:51
    2016:03:07-18:39:42 tr4c3rt pppd-pppoe[9752]: [service-name] [host-uniq 18 26 00 00]
    2016:03:07-18:39:47 tr4c3rt pppd-pppoe[9752]: Send PPPOE Discovery V1T1 PADI session 0x0 length 12
    2016:03:07-18:39:47 tr4c3rt pppd-pppoe[9752]: dst ff:ff:ff:ff:ff:ff src 0:c:29:49:ee:51
    2016:03:07-18:39:47 tr4c3rt pppd-pppoe[9752]: [service-name] [host-uniq 18 26 00 00]
    2016:03:07-18:39:57 tr4c3rt pppd-pppoe[9752]: Send PPPOE Discovery V1T1 PADI session 0x0 length 12
    2016:03:07-18:39:57 tr4c3rt pppd-pppoe[9752]: dst ff:ff:ff:ff:ff:ff src 0:c:29:49:ee:51
    2016:03:07-18:39:57 tr4c3rt pppd-pppoe[9752]: [service-name] [host-uniq 18 26 00 00]
    2016:03:07-18:40:17 tr4c3rt pppd-pppoe[9752]: Timeout waiting for PADO packets
    2016:03:07-18:40:17 tr4c3rt pppd-pppoe[9752]: Unable to complete PPPoE Discovery
    2016:03:07-18:40:17 tr4c3rt pppd-pppoe[9752]: Exit.
    2016:03:07-18:40:17 tr4c3rt pppoe-sh: DSL connection time shorter than 60 seconds (35 sec): Error? - wait 60 seconds

    Hat Jemand eine Idee warum ich nicht zu den PPPOE Servern durchkomme?

Children
No Data
Cookie Information Banner