Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Interface reconnected nicht nach Netzwerkverbindungsverlust

Hallo,

ich habe eine neue Hardware (Zotac ZBOX CI622 nano) gekauft, erfolgreich UTM 9 (Version: 9.708-6) darauf installiert und das Backup aus der alten Hardware eingespielt.

Das Problem ist nun: wenn ich das LAN oder WAN-Kabel abziehe (und somit einen Verbindungsverlust provoziere) und danach wieder anstecke, stellt das Gerät nicht automatisch wieder eine Verbindung her. Erst ein Neustart oder Interface (wobei das nur beim WAN-Interface geht, da ja sonst keine Verbindung mehr besteht) deaktivieren und aktivieren behebt das Problem.
Woran kann das liegen?

NIC-Hardware sind 2x Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller

EDIT: Es scheint der r8169-Treiber fehlerhaft zu sein, schade.

Schöne Grüße,
nordx



This thread was automatically locked due to age.
Parents Reply Children
  • Realtek devices are not suggested for use with Sophos unfortunately.  Once of the most popular chipsets out there and no one wants to bother with fixing any driver set for it.  Disappointed

    Realtek-Geräte werden leider nicht für die Verwendung mit Sophos empfohlen. Einer der beliebtesten Chipsätze da draußen und niemand möchte sich darum kümmern, einen Treibersatz dafür zu reparieren

    XG 19.5 GA 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | GB Ethernet x5

  • Thats very sad! i liked sophos UTM a lot, just wanted to get rid of my old hardware which was an old serverhardware, decomissioned from my firm and i used it as router for some years.