Guest User!

You are not Sophos Staff.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 5 subscribers
  • Views 2684 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Configuring UTM9.5

Abdul Kareem

Hi my self kareem

I need to set up the UTM 9.5 latest in home network. My connection details as follows please help to configure

 

1)Media Convertor---> Router Wan Port (has static IP)----->

2)Router Lan port----> Switch...

 

IP Details -----> Router Local Network 192.168.1.1 starting

 

How to configure utm 9.5 home in this as firewall already install utm firewall in a machine

 

Please help



This thread was automatically locked due to age.
Parents
  • 0

    Hi Abdul and welcome to the UTM Community!

    Doug's right that configuring the UTM is not for the faint of heart!

    That said, the setup wizard should get you going.  Just follow the installation instructions.  The ideal situation would be to replace your existing router with the UTM so that the UTM can have a public IP on its External interface.  If your router is also your WiFi, connect it to the UTM via one of its LAN ports and leave the WAN port unused.  Eventually, you will want to disable DHCP in the old router and have the UTM perform that function.

    You may decide to avoid those efforts as Doug suggests.

    In general, this community doesn't offer A-to-Z help, just help with specific questions.  When you run into a snag, ask a question here in the relevant forum.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0

    Hi Abdul and welcome to the UTM Community!

    Doug's right that configuring the UTM is not for the faint of heart!

    That said, the setup wizard should get you going.  Just follow the installation instructions.  The ideal situation would be to replace your existing router with the UTM so that the UTM can have a public IP on its External interface.  If your router is also your WiFi, connect it to the UTM via one of its LAN ports and leave the WAN port unused.  Eventually, you will want to disable DHCP in the old router and have the UTM perform that function.

    You may decide to avoid those efforts as Doug suggests.

    In general, this community doesn't offer A-to-Z help, just help with specific questions.  When you run into a snag, ask a question here in the relevant forum.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?

Unfiltered HTML