Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 6 subscribers
  • Views 4497 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Routing between WAN and LAN

M.Hegazy

hello everyone one

i have Sophos UTM 9 built on ESXI host

and one Managed switch

on the switch i created 3 vlans

vlan 10 - for WAN interfaces (have three wan links)

vlan 20 - users

vlan 30 - guests

everything is working just like i want except one problem

i cant make users go to internet from vlan 30 or even vlan 20

vlan 20 interface ip 10.10.10.1

vlan 30 interface ip 10.10.50.1

vlan 10 (WAN - right now iam testing with one interface to verify the connectivity) 192.168.1.9

any suggestions for this issue ?



This thread was automatically locked due to age.
Parents
  • 0
    Hello Mohamed, Before we go to far up the stack to web browsing, can you provide any further detail on what testing you have done? Meaning, from the UTM webadmin>support>tools>Ping Check, are you able to select your Internet facing port and ping out to 8.8.8.8? If successful, move back one step to your managed switch, ping the IP address of your default-route as configured in your switch, if successful, still from the switch, then ping to 8.8.8.8 and so it goes. Stepping back from your edge device moving inward to your LAN connections. If the routing/Layer3 functionality isn't working fix that, then move to name resolution (DNS) to determine further your ability to reach the Internet by browser. todd
Reply
  • 0
    Hello Mohamed, Before we go to far up the stack to web browsing, can you provide any further detail on what testing you have done? Meaning, from the UTM webadmin>support>tools>Ping Check, are you able to select your Internet facing port and ping out to 8.8.8.8? If successful, move back one step to your managed switch, ping the IP address of your default-route as configured in your switch, if successful, still from the switch, then ping to 8.8.8.8 and so it goes. Stepping back from your edge device moving inward to your LAN connections. If the routing/Layer3 functionality isn't working fix that, then move to name resolution (DNS) to determine further your ability to reach the Internet by browser. todd
Children
No Data