This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Configure ShoreTel Sky Services with SG125 UTM 9

Trying to configure ShoreTel Sky with a Cisco 7961 IP Phone to work through UTM 9.

According to ShoreTel I need to open everything listed below...

I have no problem in doing so as the phones will be configured on its own eth port.

TCP 12000 SCCP
TCP 12001 SCCP/HTTP
TCP/UDP 5060 SIP
TCP 5061 SIPS
TCP/UDP 15061 SIP
TCP 5443, 5448 CAS
Proxy.m5net.com:8XXX (TCP**)
UDP 69 TFTP
UDP 16384-37000 RTP Media Server
TCP 80
TCP/UDP 443

ShoreTel DNS Servers – VoIP DHCP Scope
64.242.250.6 and 64.242.250.7

 

Has anyone ever done this or maybe there is a guide on how to accomplish this?

I am able to use a configured phone with my current setup. Problem is that the phone will not do any Firmware updates.

Any help would be greatly appreciated.

 

So Thanks in Advanced...



This thread was automatically locked due to age.
Parents
  • Hi, Seth, and welcome to the UTM Community!

    I have a client in D.C. with an internal ShoreTel setup.  It's been several years since he and I configured that, so I can't say for certain that it was one of the exceptions described in the third link supplied by Sachin, but I can tell you that everything was done with Firewall and NAT rules.

    If you're having difficulties, try #1 in Rulz.

    Cheers - Bob

Reply
  • Hi, Seth, and welcome to the UTM Community!

    I have a client in D.C. with an internal ShoreTel setup.  It's been several years since he and I configured that, so I can't say for certain that it was one of the exceptions described in the third link supplied by Sachin, but I can tell you that everything was done with Firewall and NAT rules.

    If you're having difficulties, try #1 in Rulz.

    Cheers - Bob

Children
No Data