Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 9 replies
  • Answers 1 answer
  • Subscribers 4 subscribers
  • Views 5746 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos UTM 9: Web browsing by using a second WAN

Osvaldo Cigolini

I would like to set up web browsing by using a second WAN or a secondary IP address of the same WAN, all with Web Protection

Thank you



This thread was automatically locked due to age.
Parents
  • 0

    use a multipath rule for that.. (Interfaces&Routing / Multipath-Rules)...

    greets

    zaphod
    ___________________________________________

    Home: Zotac CI321 (8GB RAM / 120GB SSD)  with latest Sophos UTM
    Work: 2 SG430 Cluster / many other models like SG105/SG115/SG135/SG135w/...

  • 0 in reply to zaphod

    With another customer was not able to configure a second interface for outgoing traffic

  • 0 in reply to Osvaldo Cigolini

    i dont have this option under global webfiltering.. just dont use this option... use multipath rules webfilter should work too

    which firmware you have installed? wondering why i dont see this optional option to choose wan port...

    greets

    zaphod
    ___________________________________________

    Home: Zotac CI321 (8GB RAM / 120GB SSD)  with latest Sophos UTM
    Work: 2 SG430 Cluster / many other models like SG105/SG115/SG135/SG135w/...

Reply
  • 0 in reply to Osvaldo Cigolini

    i dont have this option under global webfiltering.. just dont use this option... use multipath rules webfilter should work too

    which firmware you have installed? wondering why i dont see this optional option to choose wan port...

    greets

    zaphod
    ___________________________________________

    Home: Zotac CI321 (8GB RAM / 120GB SSD)  with latest Sophos UTM
    Work: 2 SG430 Cluster / many other models like SG105/SG115/SG135/SG135w/...

Children