Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 10 replies
  • Answers 1 answer
  • Subscribers 6 subscribers
  • Views 7399 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

WebAdmin access gone after Up2Date 9.4004.005

marcelbleeker

Hi all,

Curious problem that I can not solve via other posts:

After update our firewalls, I'm not able to access the Webadmin via the WAN ports.

And yes I added the access to the correct network (even checked it via the console)
And yes I checked if the user has access.

FW01 / FW02 / FW03: UTM9 appliance
FW04 : ASG220 appliance

This all worked fine for many years now, but after the update the situation is as on the drawing.

Please advise / help.

Greetz,

Marcel.



This thread was automatically locked due to age.
Parents
  • 0

    Thanks for the replies so far.

    I've updated the firewall's to the latest version 9.405, but that didn't solve the issue.

     : The password is not the issue. I still can access 2-3-4 from the LAN side.

    Strange thing is that FW1 still can be accessed from the WAN side but not from the LAN side.

    Also checked it from different pc's in the network, but all had the same issue. That rules out any pc-related issue.

Reply
  • 0

    Thanks for the replies so far.

    I've updated the firewall's to the latest version 9.405, but that didn't solve the issue.

     : The password is not the issue. I still can access 2-3-4 from the LAN side.

    Strange thing is that FW1 still can be accessed from the WAN side but not from the LAN side.

    Also checked it from different pc's in the network, but all had the same issue. That rules out any pc-related issue.

Children
  • 0 in reply to marcelbleeker

    Hi, Marcel, and welcome to the UTM Community!

    I'm a little confused by the Redensart because I don't have direct experience with Windows auf Deutsch. Does "während die Seite geladen wurde" indicate that no connection to the site was made, or am I correct in reading that as "the server timed out?"  If Web Filtering is activated on FW01 and it is in Standard mode, do you have your client browser configured to skip the Proxy for the IP of "Internal (Address)" of FW01?

    If not, does #1 in Rulz provide a clue?

    Cheers - Bob

  • 0 in reply to BAlfson

    Hi all,

    I checked all clue's, but without results.

    Next thing I did was that I took a spare hardware UTM-220 unit and flashed new firmware from ISO image. (9.405-5)

    Made some standard settings for access but left all items as default as possible.

    assigned ip_addresses to all eth ports from 192.168.0.1 / 192.168.1.1 / 192.168.2.1 / etc etc.

    Checked the webAdmin allow: ANY networks and SuperAdmins

    Tried access from all configured subnets:

    Result:

    eth0: access (std. config port)
    eth1: access (std. WAN port)
    eth2: access (std. DMZ port)
    eth4: access
    eth5: access
    eth6: access
    eth7: access

    Restored the running config of the production firewall (FW02) to it and checked the webAdmin allow: ANY networks and SuperAdmins, result:

    eth0: access (standard config port)
    eth1: no access
    eth2: no access
    eth4: no access (external network)
    eth5: no access
    eth6: no access
    eth7: access (internal network)

    triple reviewed the running config with several other firewall guru's but it all looks very standard.

    I'm lost.......