This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

QOS SETUP

Dears,

i want to setup my QoS on my UTM 9.354 and i'm wonder if it is applicable to specified the bandwidth speed over Interface instead of network.

your quick response highly appreciated.

Regards.

This thread was automatically locked due to age.

Parents

0 BAlfson over 9 years ago

Please say what traffic you want to favor and what traffic you think is taking too much bandwidth.

Cheers - Bob
Cancel
Vote Up 0 Vote Down

Cancel
0 AleeLb over 9 years ago in reply to BAlfson

HTTP and private personal storage taking too much bandwidth.

so i want to give the priority to Emails Messaging Ports and all the other take the rest of the bandwidth.

i've 6MB so u r talking about 550 Kbps

i want to configure all email messaging ports should take 200Kbps.

and the rest will distribute on the rest of the network users.
Cancel
Vote Up 0 Vote Down

Cancel
0 BAlfson over 9 years ago in reply to AleeLb

Let me say that in a different way just to confirm that I understand what you want to do. You are concerned about download bandwidth not upload. Web browsing and cloud-based personal storage use are monopolizing your download bandwidth. Correct?

Cheers - Bob
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 BAlfson over 9 years ago in reply to AleeLb

Let me say that in a different way just to confirm that I understand what you want to do. You are concerned about download bandwidth not upload. Web browsing and cloud-based personal storage use are monopolizing your download bandwidth. Correct?

Cheers - Bob
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 AleeLb over 9 years ago in reply to BAlfson

yes correct but don't forget that i want to give the priority to the Email Messaging ports.
Cancel
Vote Up 0 Vote Down

Cancel
0 BAlfson over 9 years ago in reply to AleeLb

First, run a raw speed test (I assume that you have enabled Intrusion Prevention), as root:

cd /home
wget https://raw.githubusercontent.com/sivel/speedtest-cli/master/speedtest_cli.py --no-check-certificate
cc set ips status 0
sleep 30s
python speedtest_cli.py
cc set ips status 1

Next, on the 'Status' tab, make sure you complete the speeds and have only 'Upload Optimizer' selected for the External interface and enable it for QoS. Now, define your traffic selectors: (1) "Email" = 'Any -> Email Messaging -> Any' and (2) "Everything" = 'Any -> Any -> Any'. Finally make two Download Throttling rules, in order: (1) limit Email to 100000 kbps and (2) Limit Everything to the measured download speed less 200. If your download speed is 6000kbps, the final rule would limit all non email traffic to 5800kbps. Please share your results.

Cheers - Bob
Cancel
Vote Up 0 Vote Down

Cancel
0 AleeLb over 9 years ago in reply to BAlfson

Dear BAlfson

its not working i tried hard but nothing change and there is a DMZ network that takes all my bandwidth.

please advice

thank you.
Cancel
Vote Up 0 Vote Down

Cancel
0 BAlfson over 9 years ago in reply to AleeLb

Please insert pictures of your Download Throttling rules.

Cheers - Bob
Cancel
Vote Up 0 Vote Down

Cancel
0 AleeLb over 9 years ago in reply to BAlfson

There is no Download Throttling there is only Bandwidth Pool.

the below is my configuration. kindly note that i put the wireless users on a separate interface. i want to give this interface only 100kbps no more.

please advise.
Cancel
Vote Up 0 Vote Down

Cancel
0 BAlfson over 9 years ago in reply to AleeLb

Please re-read my post above and follow those instructions.

Cheers - Bob
Cancel
Vote Up 0 Vote Down

Cancel
0 AleeLb over 9 years ago in reply to BAlfson

Dear,

i reconfigure as u said exactly and i will check it and reply back to you.
Cancel
Vote Up 0 Vote Down

Cancel
0 AleeLb over 9 years ago in reply to AleeLb

Dear,

Nothing changed, still slow internet connection. can we manage a remote session in order to finalize it.

feel free to contact me via private messages.

thank you
Cancel
Vote Up 0 Vote Down

Cancel