This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos AP 55 WPA Enterprise

Hallo, 
ich habe eine Sophos AP 55 mit mehreren SSIDs am laufen.
Davon habe ich eine mit RADIUS Authentifizierung. Leider kann ich mich mit dieser SSID nicht Verbinden da es irgend ein Problem mit dem RADIUS-Server gibt (Windows 2012 NPS).

Log der UTM:

2015:07:07-15:16:19 192.168.0.46 hostapd: wlan9: STA 4c:XX:XX:XX:XX:8a IEEE 802.11: authenticated

2015:07:07-15:16:19 192.168.0.46 hostapd: wlan9: STA 4c:XX:XX:XX:XX:8a IEEE 802.11: associated (aid 1)
2015:07:07-15:16:19 192.168.0.46 hostapd: wlan9: STA 4c:XX:XX:XX:XX:8a IEEE 802.1X: STA identity '***X\******X'
2015:07:07-15:16:19 192.168.0.46 awelogger[1580]: id="4103" severity="info" sys="System" sub="WiFi" name="STA authentication" ssid="******X" ssid_id="WLAN1.1" bssid="00:XX:XX:XX:XX:4d" sta="4c:XX:XX:XX:XX:8a" status_code="0"
2015:07:07-15:16:19 192.168.0.46 awelogger[1580]: id="4104" severity="info" sys="System" sub="WiFi" name="STA association" ssid="******X" ssid_id="WLAN1.1" bssid="00:XX:XX:XX:XX:4d" sta="4c:XX:XX:XX:XX:8a" status_code="0"



Ereignis-Log des NPS:

Es wurde eine "Access-Request"-Meldung vom RADIUS-Client ***.***.***.*** mit einem ungültigen "Message Authenticator"-Attribut empfangen.



Zuvor hatte ich einen anderen AP von Zyxel am laufen. Da gab es keine Probleme bei der Authentifizierung.
Kann mir bitte jemand helfen?

Mit freundlichen Grüßen



This thread was automatically locked due to age.
Parents
  • -= Manually added post that could not be migrated | Originally posted by danigl 07-07-2015, 05:30 PM =-

    "Den RADIUS-Server habe ich natürlich ausgewählt.

    Außer das ich kein Client Friendly Name und NAS Identifier festgelegt habe ist alles so wie es in der Anleitung steht.
    Ich verstehe absolut nicht warum die Authentifizierung nicht funktioniert."

Reply
  • -= Manually added post that could not be migrated | Originally posted by danigl 07-07-2015, 05:30 PM =-

    "Den RADIUS-Server habe ich natürlich ausgewählt.

    Außer das ich kein Client Friendly Name und NAS Identifier festgelegt habe ist alles so wie es in der Anleitung steht.
    Ich verstehe absolut nicht warum die Authentifizierung nicht funktioniert."

Children
No Data