Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 17 replies
  • Subscribers 3 subscribers
  • Views 16153 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Hotspot Configuration

jalil1408
Hello,

What is the appropriate configuration that enables UTM 9 to manage hotspot:
  - Install USB wireless card on UTM
  or
  - Connect an AP to the internal network switch
And what are the steps to setup this configuration?


This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to Scott_Klassen
    I want to connect a Private Access Point to an access port (native vlan1) on the switch, another Guest Access Point to an access port (vlan11), UTM to a single trunk port (native vlan1 + vlan11).

    The private subnet is 192.168.1.0/24
    The guest subnet is 192.168.11.0/24

    I create 2 Ethernet VLAN interfaces :
      private vlan1 192.168.1.1/24
      guest vlan11 192.168.11.1/24

    Will this work on UTM 9.2 regarding to vlans and subnets configuration?