Hi,
Newb to Sophos so here is my question, I have two Sophos units, the main Sophos SG135, running email protection, firewall rules, everybody is surfing the net no issues here.
Site1 Sophos
WAN - public IP
LAN - 192.168.1.X subnet
Ethr port4 - connected to MetroE channel to Site 2
Site 2 Sophos
WAN - connected to channel going back to Site 1
LAN - 192.168.2.x
This SG135 sits inside the same network as site 1 on a MetroE backbone, as such they are on the same LAN subnet and Internet gateway originates at Site1.
The issue is Site 2 must be on the 192.168.2.X subnet and it must resolve out to the Internet on a secondary IP that is part of the block of WAN IP addresses, so the ISP said they will give me a single channel back to Site 1 and into the Sophos, the channel is basically a long Ethernet cable between the two sites with no routing, allowing me to put the Site2 back on its separate subnet off the MetroE.
Site 1 channel is plugged into Sophos ethr port #4 and Site 2 channel is plugged into Sophos WAN port
I need Site 2 on the .2.X subnet to pass local traffic out on WAN back to Site 1 into the Sophos for exchange and a file server, etc and all Internet traffic for Site 2 out on a secondary (additional) address.
Both subnets need to be able to ping each other as well
Any help to point me in the right direction on this would be great.
Thank you for your time
Don
This thread was automatically locked due to age.
