This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Downloads on Connection1, Uploads on Connection2 ?

Hi Guys,

Basically we've got :

2x Sophos SG-310 (Active/Standby) Cluster
1x ADSL WAN (15Mbps downlink & 1Mbps Uplink) – 192.168.0.1 :: Connected to ETH1 on Sophos
1x Fibre WAN (10Mbps downlink & 10Mbps Uplink) – 192.168.1.1 :: Connected to ETH7 on Sophos

And what we wish to achieve is the following :

1. Use the ADSL WAN for all the downlink only. This is because this connection has higher download speeds and has unlimited download quota.
2. Use the Fibre WAN for all the uplink only. This is because this connection has higher upload speeds and has unlimited upload quota.
3. Use the above 2x WAN links so if one fails the other one takes over temporarily.

Whats the best way to go about it ?

Thanks..

This thread was automatically locked due to age.

Parents

0 jazzoberoi over 10 years ago

Hi SKM,

Unfortunately, it is still not working.. I've tried Policy routing and multipath rules.

My config is as follows :

Interfaces - http://i.imgur.com/cTxc8gh.png
Uplink Balancing - http://i.imgur.com/a2UjqdI.png
Multipath Rules - http://i.imgur.com/ens8SK7.png
Static Routes - http://i.imgur.com/PQsPqIk.png
Policy Routes - http://i.imgur.com/UXmNV4e.png
Firewall Rules - http://i.imgur.com/M83zgwJ.png
NAT Masquerading - http://i.imgur.com/e3Oc0b8.png

In regards to BGP, i found the following info on my ISP's website - Telstra IN:SIGHT - Telstra Internet Direct (TID) - Telstra Business & Enterprise - IN:SIGHT

As i'm not too familiar with advanced routing protocols, i cannot properly interpret it.

In my circumstance, whats the best way to utilize the high download speeds and unlimited download quota of my ADSL WAN connection and make the most of high upload speeds and unlimited upload quota of my Fibre WAN connection ?
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 jazzoberoi over 10 years ago

Hi SKM,

Unfortunately, it is still not working.. I've tried Policy routing and multipath rules.

My config is as follows :

Interfaces - http://i.imgur.com/cTxc8gh.png
Uplink Balancing - http://i.imgur.com/a2UjqdI.png
Multipath Rules - http://i.imgur.com/ens8SK7.png
Static Routes - http://i.imgur.com/PQsPqIk.png
Policy Routes - http://i.imgur.com/UXmNV4e.png
Firewall Rules - http://i.imgur.com/M83zgwJ.png
NAT Masquerading - http://i.imgur.com/e3Oc0b8.png

In regards to BGP, i found the following info on my ISP's website - Telstra IN:SIGHT - Telstra Internet Direct (TID) - Telstra Business & Enterprise - IN:SIGHT

As i'm not too familiar with advanced routing protocols, i cannot properly interpret it.

In my circumstance, whats the best way to utilize the high download speeds and unlimited download quota of my ADSL WAN connection and make the most of high upload speeds and unlimited upload quota of my Fibre WAN connection ?
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data