Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 3 subscribers
  • Views 3282 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos UTM 9.2 VmWare low cpu utilization problem

sindrehal
Hi.

I run a 9.2 image on my vmware server with 2 VXNET3 nics.

i have 2 networks:

10.0.1.0/24  Server LAN
10.0.4.0/24 Computer LAN

when i transfer a file from a server to a computer with 10gbit nic the transfer peaks at 98 MB/s. when i look at my cpu utilization at my sophos it peaks at 20%

I have tried with vShield Edge firewall with the same Server / Computer and then the filetransfer peaks at 202MB/s so i think sophos is the bottleneck.

does ayone have any suggetions to why?

Regards
Sindre


This thread was automatically locked due to age.
Parents
  • 0
    I would drop to 2 vcpus with the same reservations..but i would do a hard reservation of 3ghz not 800 mhz.  See if it ramps then..if it does then you've hit the age old modern mahcine vs ips performance issue...if this doesn't work let us know.
Reply
  • 0
    I would drop to 2 vcpus with the same reservations..but i would do a hard reservation of 3ghz not 800 mhz.  See if it ramps then..if it does then you've hit the age old modern mahcine vs ips performance issue...if this doesn't work let us know.
Children
No Data