This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Inexpensive VoIP solution

After thinking about how much I'm paying for a slow Business DSL connection and two phone lines, I've decided to switch over to a 50/10 cable connection cut out expenses since money is really tight right now.

The house phones see very little use and I no longer need a business class line. I have a reasonably nice POTS wireless phone system with five handsets that I would like to continue using and a fax machine.

What do you guys recommend for a basic, no frills and inexpensive VoIP that will work with the Sophos UTM Home Edition here in the States?

Sophos will be installed on an i5 four core box with 4GB RAM.

Thanks!


This thread was automatically locked due to age.
Parents
  • BTW, I had a lot of noise on the POTS system at one condo I was in with VOIP hooked up; it's recommended to unhook the POTS wires from the telco on the outside of the house, and connect them together (twist both wires of a single line together). However, it didn't really help the noise at the condo.

    I had better luck at an apartment with the same equipment, and later at 2 houses with the broadvoice equipment.

    Barry
  • BTW, I had a lot of noise on the POTS system at one condo I was in with VOIP hooked up; it's recommended to unhook the POTS wires from the telco on the outside of the house, and connect them together (twist both wires of a single line together). However, it didn't really help the noise at the condo.

    I had better luck at an apartment with the same equipment, and later at 2 houses with the broadvoice equipment.

    Barry


    I'm not quite understanding you. Are you saying you were using only VoIP  and the POTS wiring was causing noise? Were you using the POTS wiring to connect your phones to one another and to the VoIP box?

    The POTS phone device I want to hook up to a VoIP has 5 wireless handsets so only the base needs to be plugged into the VoIP device. I do not need to use the POTS wires.
Reply
  • BTW, I had a lot of noise on the POTS system at one condo I was in with VOIP hooked up; it's recommended to unhook the POTS wires from the telco on the outside of the house, and connect them together (twist both wires of a single line together). However, it didn't really help the noise at the condo.

    I had better luck at an apartment with the same equipment, and later at 2 houses with the broadvoice equipment.

    Barry


    I'm not quite understanding you. Are you saying you were using only VoIP  and the POTS wiring was causing noise? Were you using the POTS wiring to connect your phones to one another and to the VoIP box?

    The POTS phone device I want to hook up to a VoIP has 5 wireless handsets so only the base needs to be plugged into the VoIP device. I do not need to use the POTS wires.
Children
  • I'm not quite understanding you. Are you saying you were using only VoIP  and the POTS wiring was causing noise? Were you using the POTS wiring to connect your phones to one another and to the VoIP box?


    Yes, and Yes.


    The POTS phone device I want to hook up to a VoIP has 5 wireless handsets so only the base needs to be plugged into the VoIP device. I do not need to use the POTS wires.


    OK, that should be noise-free.
    And your fax will be in the same room as the VOIP adapter and the phone?

    Barry

  • And your fax will be in the same room as the VOIP adapter and the phone?

    Yes.

    I chatted with Ooma a few minutes ago and they said they do support faxing but they do not guarantee 100% success. I rarely use the fax machine anymore but it's nice to have it when you need it so I think I'm going to give Ooma a try. 

    I should have done this a long time ago. I've been wasting money on two phone lines (needed them for work) and a slow DSL connection. If I switch to cable and add Ooma, I can go from a 3/0.8 connection to a 50/10 connection and still save $85 a month.

    Thanks again Barry for your input!