This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Bit Torrent sync / firewall rules

okay im at my witts end here I thought i understood how the firewall works but i guess im not getting something


example from the log

01:58:12 Default DROP UDP 10.10.10.194 : 42816 → 54.225.100.8 : 3000 len=125 ttl=127 tos=0x00 srcmac=2c:41:38:11:87:c3 dstmac=0:1a:8c:12:86:a0
01:58:12 Default DROP UDP 10.10.10.194 : 42816 → 54.225.100.8 : 3000 len=125 ttl=127 tos=0x00 srcmac=2c:41:38:11:87:c3 dstmac=0:1a:8c:12:86:a0
01:58:19 Default DROP UDP 10.10.10.116 : 42816 → 54.225.100.8 : 3000 len=125 ttl=127 tos=0x00 srcmac=0:25:90:3c:2b:25 dstmac=0:1a:8c:12:86:a0
01:58:22 Default DROP UDP 10.10.10.194 : 42816 → 54.225.100.8 : 3000 len=125 ttl=127 tos=0x00 srcmac=2c:41:38:11:87:c3 dstmac=0:1a:8c:12:86:a0
01:58:22 Default DROP UDP 10.10.10.194 : 42816 → 54.225.100.8 : 3000 len=125 ttl=127 tos=0x00 srcmac=2c:41:38:11:87:c3 dstmac=0:1a:8c:12:86:a0
01:58:29 Default DROP UDP 10.10.10.116 : 42816 → 54.225.100.8 : 3000 len=125 ttl=127 tos=0x00 srcmac=0:25:90:3c:2b:25 dstmac=0:1a:8c:12:86:a0
01:58:32 Default DROP UDP 10.10.10.194 : 42816 → 54.225.100.8 : 3000 len=125 ttl=127 tos=0x00 srcmac=2c:41:38:11:87:c3 dstmac=0:1a:8c:12:86:a0


the rule i setup was

Internal (network)→ BT Sync* → any

*BT Sync  UDP 1:65535 → 42816

Its dropping all the packets 

any pointers?


This thread was automatically locked due to age.
Parents
  • okay im at my witts end here I thought i understood how the firewall works but i guess im not getting something


    example from the log

    01:58:12 Default DROP UDP 10.10.10.194 : 42816 → 54.225.100.8 : 3000 len=125 ttl=127 tos=0x00 srcmac=2c:41:38:11:87:c3 dstmac=0:1a:8c:12:86:a0
    01:58:12 Default DROP UDP 10.10.10.194 : 42816 → 54.225.100.8 : 3000 len=125 ttl=127 tos=0x00 srcmac=2c:41:38:11:87:c3 dstmac=0:1a:8c:12:86:a0
    01:58:19 Default DROP UDP 10.10.10.116 : 42816 → 54.225.100.8 : 3000 len=125 ttl=127 tos=0x00 srcmac=0:25:90:3c:2b:25 dstmac=0:1a:8c:12:86:a0
    01:58:22 Default DROP UDP 10.10.10.194 : 42816 → 54.225.100.8 : 3000 len=125 ttl=127 tos=0x00 srcmac=2c:41:38:11:87:c3 dstmac=0:1a:8c:12:86:a0
    01:58:22 Default DROP UDP 10.10.10.194 : 42816 → 54.225.100.8 : 3000 len=125 ttl=127 tos=0x00 srcmac=2c:41:38:11:87:c3 dstmac=0:1a:8c:12:86:a0
    01:58:29 Default DROP UDP 10.10.10.116 : 42816 → 54.225.100.8 : 3000 len=125 ttl=127 tos=0x00 srcmac=0:25:90:3c:2b:25 dstmac=0:1a:8c:12:86:a0
    01:58:32 Default DROP UDP 10.10.10.194 : 42816 → 54.225.100.8 : 3000 len=125 ttl=127 tos=0x00 srcmac=2c:41:38:11:87:c3 dstmac=0:1a:8c:12:86:a0


    the rule i setup was

    Internal (network)→ BT Sync* → any

    *BT Sync  UDP 1:65535 → 42816

    Its dropping all the packets 

    any pointers?


    the easiest way to do this is to tell your client use x-port range..usually 5 ports wide..then you can nat those back to your machine.  If your client won't let you do that get a different client.
Reply
  • okay im at my witts end here I thought i understood how the firewall works but i guess im not getting something


    example from the log

    01:58:12 Default DROP UDP 10.10.10.194 : 42816 → 54.225.100.8 : 3000 len=125 ttl=127 tos=0x00 srcmac=2c:41:38:11:87:c3 dstmac=0:1a:8c:12:86:a0
    01:58:12 Default DROP UDP 10.10.10.194 : 42816 → 54.225.100.8 : 3000 len=125 ttl=127 tos=0x00 srcmac=2c:41:38:11:87:c3 dstmac=0:1a:8c:12:86:a0
    01:58:19 Default DROP UDP 10.10.10.116 : 42816 → 54.225.100.8 : 3000 len=125 ttl=127 tos=0x00 srcmac=0:25:90:3c:2b:25 dstmac=0:1a:8c:12:86:a0
    01:58:22 Default DROP UDP 10.10.10.194 : 42816 → 54.225.100.8 : 3000 len=125 ttl=127 tos=0x00 srcmac=2c:41:38:11:87:c3 dstmac=0:1a:8c:12:86:a0
    01:58:22 Default DROP UDP 10.10.10.194 : 42816 → 54.225.100.8 : 3000 len=125 ttl=127 tos=0x00 srcmac=2c:41:38:11:87:c3 dstmac=0:1a:8c:12:86:a0
    01:58:29 Default DROP UDP 10.10.10.116 : 42816 → 54.225.100.8 : 3000 len=125 ttl=127 tos=0x00 srcmac=0:25:90:3c:2b:25 dstmac=0:1a:8c:12:86:a0
    01:58:32 Default DROP UDP 10.10.10.194 : 42816 → 54.225.100.8 : 3000 len=125 ttl=127 tos=0x00 srcmac=2c:41:38:11:87:c3 dstmac=0:1a:8c:12:86:a0


    the rule i setup was

    Internal (network)→ BT Sync* → any

    *BT Sync  UDP 1:65535 → 42816

    Its dropping all the packets 

    any pointers?


    the easiest way to do this is to tell your client use x-port range..usually 5 ports wide..then you can nat those back to your machine.  If your client won't let you do that get a different client.
Children
No Data