This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cisco WAP321 Access Point

Has anyone had a chance to use a Cisco WAP321 access point with ASG?  I'm particularly interested in how well it works with iPhone5's and VLAN setups.  

My current Netgear WAG102 is having a lot of connection issues with the the iPhone 5.  Wifi drops out multiple times within a 5-10 minute period, causing the phone to switch to LTE.

Thinking about the Cisco WAP321 as a replacement since it seems decent on the cost : features breakout and since this is just for a home network with only a couple of SSID's needed.


This thread was automatically locked due to age.
Parents
  • OK.
    I'm not sure if you have a VLAN switch... if you do, you could probably Trunk some VLANs to the AP (assuming the AP is VLAN-capable, which it appears to be).
    You could use the VLAN features of Astaro to separate traffic as desired.
    I'm not sure how the VLAN features on the AP would coincide with the VLANs on the switch.

    Or, you could plug the AP into a new interface on Astaro, and create some VLANs in Astaro for it. In this case, if you want to share some or all of the WiFi VLANs with your LANs, you might need to do some bridging in Astaro.

    Barry
Reply
  • OK.
    I'm not sure if you have a VLAN switch... if you do, you could probably Trunk some VLANs to the AP (assuming the AP is VLAN-capable, which it appears to be).
    You could use the VLAN features of Astaro to separate traffic as desired.
    I'm not sure how the VLAN features on the AP would coincide with the VLANs on the switch.

    Or, you could plug the AP into a new interface on Astaro, and create some VLANs in Astaro for it. In this case, if you want to share some or all of the WiFi VLANs with your LANs, you might need to do some bridging in Astaro.

    Barry
Children
No Data