This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

HTTPS port forwarding not working

Hi, I need to forward port 443 (https), I already create the DNAT and Firewall rule, but isn't working. I already have port 25 and 110 forwarded and is working. Here is the log line when I test https:

7:43:17 Default DROP TCP
8.23.224.110 : 24198
→
68.164.98.130 : 443

[ACK RST] len=40 ttl=118 tos=0x00 srcmac=0:22:10:9d:88:10 dstmac=0:e0:4c:eb:f3:98

Please help

This thread was automatically locked due to age.

0 creativity over 13 years ago

Note - By default, port 443 (HTTPS) is used for the User Portal. If you plan to forward
port 443 to an internal server, you need to change the TCP port of the User Portal to another value (eg, 1443) on the Management>> User Portal>>
Advanced tab.
Cancel
Vote Up 0 Vote Down

Cancel
0 BAlfson over 13 years ago

Creativity quotes the user manual for the User Portal, but I think this also affects the SSL VPN. If you have a second public IP, you're better off to put an Additional Address on the External interface. If not, then you probably are better off to use a different port for your server DNAT, like 1443->443.

In any case, whenever you post a line from the Firewall log, find the same one in the full log and post that - there's not enough information in the Live Log to be able to diagnose anything other than passed/blocked.

Cheers - Bob
Cancel
Vote Up 0 Vote Down

Cancel
0 Ol Deda over 13 years ago

edit that rule again and check the box
"Automatic
Firewall rule:"
Cancel
Vote Up 0 Vote Down

Cancel