Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 3 subscribers
  • Views 5376 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

autonegotiate

BradCall_01
is there a way to check what my wan port has auto-negotiated to.  I trying to trouble shoot a slow connection


This thread was automatically locked due to age.
Parents
  • 0
    Hi Scott.
    what would you say of this result?

    SIOCGMIIREG on eth2 failed: Input/output error
    Basic registers of MII PHY #1:  1140 792d 02a8 0380 0de1 c401 000d ffff.
     The autonegotiated capability is 0000.
    No common media type was autonegotiated!
    This is extremely unusual and typically indicates a configuration error.
    Perhaps the advertised capability set was intentionally limited.
     Basic mode control register 0x1140: Auto-negotiation enabled.
     You have link beat, and everything is working OK.
     Your link partner advertised c401: Flow-control, w/ 802.3X flow control.
       End of basic transceiver information.

    It seems to work fine,
Reply
  • 0
    Hi Scott.
    what would you say of this result?

    SIOCGMIIREG on eth2 failed: Input/output error
    Basic registers of MII PHY #1:  1140 792d 02a8 0380 0de1 c401 000d ffff.
     The autonegotiated capability is 0000.
    No common media type was autonegotiated!
    This is extremely unusual and typically indicates a configuration error.
    Perhaps the advertised capability set was intentionally limited.
     Basic mode control register 0x1140: Auto-negotiation enabled.
     You have link beat, and everything is working OK.
     Your link partner advertised c401: Flow-control, w/ 802.3X flow control.
       End of basic transceiver information.

    It seems to work fine,
Children
No Data