I have an dedicated EQ4 Server from Hetzner.
I has order 3 additional IPś.
The following setup i try to setup:
Internet----Proxmox-----Astaro.in.kvm----my.vservers.in.DMZ
With this Setup i want Protect my vservers.
My Proxmox /etc/network/interface
auto eth0
iface eth0 inet static
address 176.9.17.15
netmask 255.255.255.224
gateway 176.9.17.1
broadcast 176.9.17.31
pointopoint 176.9.17.1
post-up mii-tool -F 100baseTx-FD eth0
post-up echo 1 > /proc/sys/net/ipv6/conf/eth0/proxy_ndp
post-up echo 1 > /proc/sys/net/ipv4/conf/eth0/proxy_arp
post-up echo 1 > /proc/sys/net/ipv4/ip_forward
auto vmbr0
iface vmbr0 inet static
address 176.9.17.15
netmask 255.255.255.224
broadcast 176.9.17.31
bridge_ports none
bridge_stp off
bridge_fd 0
up ip route add 176.9.33.12 dev vmbr0
up ip route add 176.9.33.14 dev vmbr0
up ip route add 176.9.27.26 dev vmbr0
auto vmbr1
iface vmbr1 inet manual
bridge_ports none
bridge_stp off
bridge_fd 0
So i has install Astaro without Problems, in Proxmox i give the Astaro 3x vmbr0 for 3 NICs WAN/Internal/DMZ
From the Network ports config in Astaro i has made Pictures.
When i make an vserver for internal it get an automatic Lokal IP and get acces to internet all so how i want it. But what must i do when i want an vserver in DMZ with an static ip from the ips i get from hetzner?
thank you
This thread was automatically locked due to age.
