This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

BUG: 8.201 using 100% of CPU

I have been using 8.103 for some time and had no issues with CPU usage. However after the update to 8.201, ASG Home has been consuming 100% of the CPU. I rebooted the machine both days and CPU usage returns to normal, but eventually will jump back up again. See the attached graph.

cpuusage_daily.png

In addition to this issue, I noticed that I am unable to double scan web downloads or the download is never accessible. With double scanning enabled, I see the Astaro download screen, but then it jumps to a blank page. In 8.103 this worked fine, but in 8.201 unless I just select single scan, I am unable to get downloaded files. A specific example was this link.

http://www.linuxjournaldigital.com/01d49f0edcd9418d3c3a3b20034855a6/4e55247b/linuxjournal/201109/data/linuxjournal201109-dl.pdf?lm=1314190536000

Any assistance on these issues would be appreciated.

Mike

This thread was automatically locked due to age.

Parents

0 Scott_Klassen over 14 years ago

ok, we'll check the patterns a different way. You'll need to use WinSCP. See the attached screenshot. These are the patterns in a current ClamAV store. Note the time/date stamps and sizes. How do yours compare?

Then in /var/up2date you'll see two directories for ClamAV, clam and clam-install. Both of these should have a recent time/date stamp and be empty.
- clamstore.jpg
- View
- Hide
Cancel
Vote Up 0 Vote Down

Cancel
0 mikeshappell over 14 years ago in reply to Scott_Klassen
ok, we'll check the patterns a different way.  You'll need to use WinSCP.  See the attached screenshot.  These are the patterns in a current ClamAV store.  Note the time/date stamps and sizes.  How do yours compare?

Then in /var/up2date you'll see two directories for ClamAV, clam and clam-install.  Both of these should have a recent time/date stamp and be empty.

OK, I enabled shell access and took a look at those directories. They seem to look OK, assuming that 8/08/11 for the two files below is correct. The sizes are as expected.

-rw-r--r-- 1 root root   478208 2011-08-08 17:35 bytecode.cld
-rw-r--r-- 1 root root 11320832 2011-08-28 17:35 daily.cld
-rw-r--r-- 1 root root 26224310 2011-08-08 17:35 main.cvd
-rw-r--r-- 1 root root        0 2011-08-28 19:23 reload

drwxr-xr-x 2 root root 4096 2011-08-28 19:23 clam
drwxr-xr-x 2 root root 4096 2011-08-28 19:23 clam-install

Mike
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 mikeshappell over 14 years ago in reply to Scott_Klassen
ok, we'll check the patterns a different way.  You'll need to use WinSCP.  See the attached screenshot.  These are the patterns in a current ClamAV store.  Note the time/date stamps and sizes.  How do yours compare?

Then in /var/up2date you'll see two directories for ClamAV, clam and clam-install.  Both of these should have a recent time/date stamp and be empty.

OK, I enabled shell access and took a look at those directories. They seem to look OK, assuming that 8/08/11 for the two files below is correct. The sizes are as expected.

-rw-r--r-- 1 root root   478208 2011-08-08 17:35 bytecode.cld
-rw-r--r-- 1 root root 11320832 2011-08-28 17:35 daily.cld
-rw-r--r-- 1 root root 26224310 2011-08-08 17:35 main.cvd
-rw-r--r-- 1 root root        0 2011-08-28 19:23 reload

drwxr-xr-x 2 root root 4096 2011-08-28 19:23 clam
drwxr-xr-x 2 root root 4096 2011-08-28 19:23 clam-install

Mike
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data