This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Astaro HA can't reach internal DNS server

I'm running into a strange problem with my Astaro Active/Passive HA accessing my internal DNS server on the LAN.

My internal DNS server forwards external requests to the Astaro which in turn is configured to forward to my ISP's DNS servers. Everything works great when the Slave node is shut down (I can resolve internal and external addresses). However, when I power the slave node on, the HA agent kicks in to synchronize with the master and my LAN clients stop being able to access external addresses. Even after the nodes both switch to "ACTIVE" state, I can't resolve external names.

Further investigation shows that the internal DNS server is unable to ping the Astaro (it's gateway) and the astaro is unable to ping the DNS server on the LAN.

Everything works normally once the slave is shut down. Any ideas why the presence of the slave prevents communication between the Astaro and my internal DNS server?


This thread was automatically locked due to age.
Parents
  • Hi, Mike, and welcome to the User BB!

    If you're a commercial customer, you should submit a ticket to Astaro Support for behavior that changes when you power-up the Slave.

    Pinging is allowed by configuring the 'ICMP' tab in 'Packet Filter'.

    Cheers - Bob
Reply
  • Hi, Mike, and welcome to the User BB!

    If you're a commercial customer, you should submit a ticket to Astaro Support for behavior that changes when you power-up the Slave.

    Pinging is allowed by configuring the 'ICMP' tab in 'Packet Filter'.

    Cheers - Bob
Children
  • Hi Bob, thanks for the warm welcome.

    I'm not a commercial customer yet but do use the HA at home since the environment is virtual it seemed like a good idea to try since the new home license allows it.

    The other machines on the LAN can ping the Astaro gateway including the DNS server when the Slave is shut down. Powering on the slave however stops allowing the pings (only between Astaro and the DNS server). I don't see anything in the packet filter logs either.

    I tried changing which host functions as the Master but that didn't change the behavior.