Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 13 replies
  • Subscribers 3 subscribers
  • Views 2894 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

All i get are unable to connect and server timeouts during setup.

009
I installed the nice free home edition of astaro and when i get to the point of connecting to the WebAdmin page to setup, my browsers return with nothing but sever timeout messages or unable to connect messages. I tried reinstalling with different a NIC chosen, a different ip address, different computers, different cables, different hubs, different browsers... nothing seems to work. Does anyone have an idea of what the problem is before i decide that the best solution is to throw it out my window?

I appreciate any help.


This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to 009
    yeah that would help, sorry i left that out... kind of over looked it in my frustration.

    ipconfig tells me im 192.168.1.101

    my astaro box is set up to 192.168.2.100

    im typing in https://192.168.2.100:4444/

    that should be right.


    Hi ,
    the problem is u r ip configuration at client u r client ip should be 
    192.168.2.101 or so 
    not 192.168.1.101
    thx
  • 0 in reply to 009
    yeah that would help, sorry i left that out... kind of over looked it in my frustration.

    ipconfig tells me im 192.168.1.101

    my astaro box is set up to 192.168.2.100

    im typing in https://192.168.2.100:4444/

    that should be right.


    That is your problem... different logical network even though same physical network.

    You need to give the Astaro box an IP in your existing subnet that does not conflict with anything else, i.e. 192.168.1.20 or something.
  • 0 in reply to ReD-MaN
    Please either re-install ASTARO and when you get the option to change the ASTARO Internal eth0 IP just set it to the subnet you want i.e. 192.168.1.0/24 and then change the default from 192.168.2.100 to 192.168.1.1,2,3,100 or any IP that you will not use for anything else.

    Or, just change the IP of your machine that wants to connect to the default, i.e. 192.168.2.1,2,3,101,102.

    If your network runs a DHCP server, then change the scope for 192.168.2.0/24 and all your addresses will be changed automatically