Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 19 replies
  • Subscribers 3 subscribers
  • Views 9301 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

vnc problem

asgnewbie
hello,

I have one server(w/ private ip) resides behind my asg320.the vnc server installed on that particular machine.
I create a DNAT rule w/c I could access via vnc when Im out the office.
My problem as of now I got an error "Failed to connect the server".

I already opened ports (5800,5801,5900,5901) but still failed to access via vnc remotely.
Accessing the said server locally via vnc has no problem.

Need additional suggestions if any.

Thanks


This thread was automatically locked due to age.
Parents
  • 0
    Run a sniffer (tcpdump) on the internal interface of the firewall and see if the traffic is entering the network.
    If it's entering, and there's no response, then something's probably wrong on the PC.

    Barry
Reply
  • 0
    Run a sniffer (tcpdump) on the internal interface of the firewall and see if the traffic is entering the network.
    If it's entering, and there's no response, then something's probably wrong on the PC.

    Barry
Children
No Data