Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 3 subscribers
  • Views 1918 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Astaro ASG 7.5.02 and T1 Setup

bsawyers
Need help setting up my Astaro ASG to work with t1 and Cisco 2811 router?


This thread was automatically locked due to age.
Parents
  • 0
    please provide more information.

    normaly you will need a fixed Ip on the wan interface and use the cisco router as default gateway (setup here in switzerland with a fibre connection).
Reply
  • 0
    please provide more information.

    normaly you will need a fixed Ip on the wan interface and use the cisco router as default gateway (setup here in switzerland with a fibre connection).
Children
  • 0 in reply to r2k
    Sorry, 

    My current setup is a 10 meg up and down T1. Cisco asa 505 firewall and Cisco 2811 router.

    Firewall:
    Inside interface is 192.168.254.1    255.255.255.0
    Outside interface is ***.***.***.146    255.255.255.240
    Static Routes:
    inside 192.168.0.0    255.255.0.0    192.168.254.2
    outside 0.0.0.0    0.0.0.0   ***.***.***.145

    Cisco Router:
    Fast ethernet 0/0   192.168.254.2   255.255.255.0  connection to firewall
    Fast ethernet 0/1   192.168.1.254   255.255.255.0   connection to lan
    static routing:
    0.0.0.0   0.0.0.0   192.168.254.1

    astaro:
    internal network is 192.168.254.1    255.255.255.0
    External wan is ***.***.***.146    255.255.255.240
    Static Routes:
    inside 192.168.0.0   255.255.0.0   192.168.254.2
    cant get 0.0.0.0    0.0.0.0   ***.***.***.145 to add on astaro

    I'm trying to replace the asa 505 with the astaro asg this setup gets me internet if i use the astaro as the gateway when i have the router as the gateway no internet access?