I am just encountering problems with a small asg 120 and I believe it has something to do with the temperature so I logged in via ssh as root and tried to setup lmsensors but it fails with "/dev/port: Operation not permitted".
The full message:
sensors-detect
# sensors-detect revision 1.413 (2006/01/19 20:28:00)
This program will help you determine which I2C/SMBus modules you need to
load to use lm_sensors most effectively. You need to have i2c and
lm_sensors installed before running this program.
Also, you need to be `root', or at least have access to the /dev/i2c-*
files, for most things.
If you have patched your kernel and have some drivers built in, you can
safely answer NO if asked to load some modules. In this case, things may
seem a bit confusing, but they will still work.
It is generally safe and recommended to accept the default answers to all
questions, unless you know what you're doing.
We can start with probing for (PCI) I2C or SMBus adapters.
You do not need any special privileges for this.
Do you want to probe now? (YES/no):
Probing for PCI bus adapters...
Use driver `i2c-viapro' for device 00:11.0: VIA Technologies VT8237 South Bridge
Probe succesfully concluded.
We will now try to load each adapter module in turn.
Load `i2c-viapro' (say NO if built into your kernel)? (YES/no):
Module loaded succesfully.
If you have undetectable or unsupported adapters, you can have them
scanned by manually loading the modules before running this script.
To continue, we need module `i2c-dev' to be loaded.
If it is built-in into your kernel, you can safely skip this.
i2c-dev is not loaded. Do you want to load it now? (YES/no):
Module loaded succesfully.
We are now going to do the adapter probings. Some adapters may hang halfway
through; we can't really help that. Also, some chips will be double detected;
we choose the one with the highest confidence value in that case.
If you found that the adapter hung after probing a certain address, you can
specify that address to remain unprobed. That often
includes address 0x69 (clock chip).
Next adapter: SMBus Via Pro adapter at 0500
Do you want to scan it? (YES/no/selectively):
Client found at address 0x2d
Probing for `Myson MTP008'... Failed!
Probing for `National Semiconductor LM78'... Failed!
Probing for `National Semiconductor LM78-J'... Failed!
Probing for `National Semiconductor LM79'... Failed!
Probing for `National Semiconductor LM80'... Failed!
Probing for `National Semiconductor LM85 or LM96000'... Failed!
Probing for `Analog Devices ADM1027, ADT7460 or ADT7463'... Failed!
Probing for `SMSC EMC6D100, EMC6D101 or EMC6D102'... Failed!
Probing for `Analog Devices ADT7476'... Failed!
Probing for `National Semiconductor LM87'... Failed!
Probing for `National Semiconductor LM93'... Failed!
Probing for `Winbond W83781D'... Failed!
Probing for `Winbond W83782D'... Failed!
Probing for `Winbond W83783S'... Failed!
Probing for `Winbond W83791D'... Failed!
Probing for `Winbond W83792D'... Success!
(confidence 8, driver `w83792d'), other addresses: 0x49 0x4d
Probing for `Winbond W83791SD'... Failed!
Probing for `Winbond W83627HF'... Failed!
Probing for `Winbond W83627EHF'... Failed!
Probing for `Asus AS99127F (rev.1)'... Failed!
Probing for `Asus AS99127F (rev.2)'... Failed!
Probing for `Asus ASB100 Bach'... Failed!
Probing for `Winbond W83L784R/AR'... Failed!
Probing for `Winbond W83L785R'... Failed!
Probing for `Genesys Logic GL518SM Revision 0x00'... Failed!
Probing for `Genesys Logic GL518SM Revision 0x80'... Failed!
Probing for `Genesys Logic GL520SM'... Failed!
Probing for `Genesys Logic GL525SM'... Failed!
Probing for `Analog Devices ADM9240'... Failed!
Probing for `Dallas Semiconductor DS1780'... Failed!
Probing for `National Semiconductor LM81'... Failed!
Probing for `Analog Devices ADM1026'... Failed!
Probing for `Analog Devices ADM1025'... Failed!
Probing for `Philips NE1619'... Failed!
Probing for `Analog Devices ADM1024'... Failed!
Probing for `Analog Devices ADM1029'... Failed!
Probing for `Analog Devices ADM1030'... Failed!
Probing for `Analog Devices ADM1031'... Failed!
Probing for `Analog Devices ADM1022'... Failed!
Probing for `Texas Instruments THMC50'... Failed!
Probing for `VIA VT1211 (I2C)'... Failed!
Probing for `ITE IT8712F'... Failed!
Probing for `ALi M5879'... Failed!
Probing for `SMSC LPC47M15x, LPC47M192 or LPC47M997'... Failed!
Client found at address 0x49
Probing for `National Semiconductor LM75'... Failed!
Probing for `National Semiconductor LM77'... Failed!
Probing for `Dallas Semiconductor DS1621'... Failed!
Probing for `National Semiconductor LM92'... Failed!
Probing for `National Semiconductor LM76'... Failed!
Probing for `Maxim MAX6633/MAX6634/MAX6635'... Failed!
Client found at address 0x4d
Probing for `National Semiconductor LM75'... Failed!
Probing for `Dallas Semiconductor DS1621'... Failed!
Probing for `Analog Devices ADM1021'... Failed!
Probing for `Analog Devices ADM1021A/ADM1023'... Failed!
Probing for `Maxim MAX1617'... Failed!
Probing for `Maxim MAX1617A'... Failed!
Probing for `TI THMC10'... Failed!
Probing for `National Semiconductor LM84'... Failed!
Probing for `Genesys Logic GL523SM'... Failed!
Probing for `Onsemi MC1066'... Failed!
Probing for `Maxim MAX1619'... Failed!
Probing for `National Semiconductor LM82/LM83'... Failed!
Probing for `National Semiconductor LM89/LM99'... Failed!
Probing for `Analog Devices ADM1032'... Failed!
Probing for `Maxim MAX6659'... Failed!
Probing for `Maxim MAX6633/MAX6634/MAX6635'... Failed!
Probing for `Analog Devices ADT7461'... Failed!
Client found at address 0x50
Probing for `SPD EEPROM'... Success!
(confidence 8, driver `eeprom')
Probing for `DDC monitor'... Failed!
Probing for `Maxim MAX6900'... Failed!
Client found at address 0x61
Probing for `SMBus 2.0 ARP-Capable Device'... Success!
(confidence 1, driver `smbus-arp')
Client found at address 0x69
Some chips are also accessible through the ISA bus. ISA probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.
Do you want to scan the ISA bus? (YES/no):
/dev/port: Operation not permitted
Any hint? I really would like to get the temperature via the remote shell.
Thanks in advance.
Cheers,
Andreas.
This thread was automatically locked due to age.
