This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Version 6 info.

Just got this from Ish:

(Edited)
The beta release will be available for download on May 6 at the following links:
- Astaro FTP server: ftp2.astaro.de
- Astaro HTTP server: download2.astaro.de
- via BitTorrent (http://en.wikipedia.org/wiki/Bittorrent)


Highlights of the beta release include:

o-- Transparent Firewall Mode
Packets can traverse the firewall without modifying any of the source or destination information in the IP packet header (acting like a layer
2 switch or bridge). There is no need to reconfigure IP space from currently assigned addresses. (Previously a subnet had to be split in at least two different subnets in order to put ASL in between). It is easy to pull a firewall out of the loop to diagnose network problems and to accurately map problem IP addresses.

o-- Time-Based Packet Filter and Surf Protection Configuration
You can apply configuration options for packet and URL filters for specified time periods. For example, you can enable a set of firewall rules that allows a specific group access to specific servers only on Monday through Friday, from 8:00AM to 5:00PM.

o-- Support for the Linux Kernel 2.6
Astaro Security Linux V6 utilizes the new Linux kernel 2.6. Benefits
include:
- Support for S-ATA disks
- Increased performance for multithreaded applications (e.g. the content filter) via use of new thread library and support of Hyper-Threading Technology. This enables a single physical processor to execute two or more separate code streams (threads) concurrently.
- Support of new hardware and new devices

o-- Policy-Based Routing
Traffic can be forwarded and routed based on source IP address, source port and destination port (in addition to normal routing, which is based on the destination IP address). With this feature traffic can be spread over multiple Internet uplinks to improve application performance, improve the use of bandwidth, and control costs.

o-- SIP (Session Initiation Protocol) Proxy
The SIP Proxy increases flexibility, security and performance when supporting Voice over IP (VoIP) communications. SIP software clients (like kphone, xlite) and SIP hardware clients (Voice over IP phones which are SIP-compatible, such as those from Cisco, Grandstream or
Snom) can work behind an IP masquerading firewall or NAT router.

o-- Anomaly-Based Intrusion Protection
Increased protection against "zero-day-attacks" (malicious threats that attack enterprise networks before signatures have been developed). To guard against these early attacks, Astaro Security Linux analyzes the behavior of "normal" traffic and identifies anomalies that indicate a possible new attack, for example, new services, previously unseen hosts, and unusual amounts of traffic.


Limitations
With the provided Beta there will be some limitations as well as some features missing. A detailed list will be included in the provided release. With the beta release there will be no manual and online help finalized.

HW requirements
Astaro minimum recommendation for V6 Beta installations:
Intel Pentium III 900 MHz, 256MB RAM, 10 GB hard disk drive and above.

Best performance results running on:
Dual Xeon or Athlon, 512MB/1GB RAM, 10 GB SCSI hard disk drive and above.

Resources and Links
During V6 Beta phase the latest release of the beta software will be available at the download links listed above.

A hardware compatibility list and a known issues list for the beta release will be available at:
http://docs.astaro.org


This thread was automatically locked due to age.
Parents
  • [ QUOTE ]

    - Support for S-ATA disks
     

    [/ QUOTE ]

    What I really want to know is does this mean we will be able to load drivers for 3rd party SATA RAID cards? 

    I recently tried to install a high performance Areca RAID card in our new dual Zeon Dell machine that I'm getting ready to install in place of out current 1GHz machine. 
    But to install the drivers for it I needed to be able to type in either "text dd" or "Linux dd" at the "boot:" prompt when installing Astaro. Astaro did not recognize either command, and instead gave me the error message "Could not find kernal image: dd". So since it did not recognize either command I could not install the Areca drivers.

    Anyone know if these commands to install the 3rd party drivers will work with V6 which uses the 2.6 kernal? 

    Thanks,
    Patrick
  • [ QUOTE ]
    What I really want to know is does this mean we will be able to load drivers for 3rd party SATA RAID cards?

    [/ QUOTE ]My guess is that the new ASL v6 with its Linux 2.6 kernel will be quite close to the SuSE Linux 2.6 kernel implementation in terms of what devices it will support. It is my understanding that the folks at Astaro has traditionally used SuSE as their reference for their custom ASL builds.

    We will see when the hardware compatibility list comes out, which S-ATA controllers they will actually support. I am hoping for Promise FastTrak support, since the Promise S-ATA and RAID controller chips are included on so many high end motherboards.
  • [ QUOTE ]
    My guess is that the new ASL v6 with its Linux 2.6 kernel will be quite close to the SuSE Linux 2.6 kernel implementation in terms of what devices it will support. It is my understanding that the folks at Astaro has traditionally used SuSE as their reference for their custom ASL builds. 

    [/ QUOTE ]

    I was told it was based more closely to Red Hat distributions by one of their partners. In fact, I believe they even had it up on Astaro's site until recently.

    Best Regards,
    Patrick
Reply
  • [ QUOTE ]
    My guess is that the new ASL v6 with its Linux 2.6 kernel will be quite close to the SuSE Linux 2.6 kernel implementation in terms of what devices it will support. It is my understanding that the folks at Astaro has traditionally used SuSE as their reference for their custom ASL builds. 

    [/ QUOTE ]

    I was told it was based more closely to Red Hat distributions by one of their partners. In fact, I believe they even had it up on Astaro's site until recently.

    Best Regards,
    Patrick
Children
  • [ QUOTE ]
    [ QUOTE ]
    My guess is that the new ASL v6 with its Linux 2.6 kernel will be quite close to the SuSE Linux 2.6 kernel implementation in terms of what devices it will support. It is my understanding that the folks at Astaro has traditionally used SuSE as their reference for their custom ASL builds. 

    [/ QUOTE ]

    I was told it was based more closely to Red Hat distributions by one of their partners. In fact, I believe they even had it up on Astaro's site until recently.

    Best Regards,
    Patrick 

    [/ QUOTE ]
    Well they actually use SUSE.  Howver SUSE was a fork of redhat if i remember correctly as mandrake(now mandriva) started as a redhat fork.
  • That makes sense then William.

    Thanks for the info.

    Patrick
  • Hi all,

    looks like Simon has  the best connections...

    SUSERedHat: SUSE was never a fork of RedHat. IMHO they started before RedHat and switched later from tgz to the RPM system
  • Suse is a fork of slackware..[[:)]]  Just ran it down online..[[:)]]
  • [ QUOTE ]
    Well they actually use SUSE

    [/ QUOTE ]As I thought.     

    SuSE has been the pre-eminent German Linux distribution for a number of years. SuSE Linux has been held in such high regard that Novell paid $210 million to aquire it, with the help of a $50 million kick-in from IBM. The close relationship between Astaro and SuSE help explain why Astaro Security Linux is now also being marketed as the Novell Security Manager.

    http://www.novell.com/products/securitymanager/

    Astaro, SuSE and Novell have become closely connected over the past couple of years. It seems to be working well for them.
  • "looks like Simon has the best connections..."

    Meh, I just got it in my Astaro resellers newsletter mailout.  Maybe they let the cat out of the bag early, but since it was sent to many people I saw no harm in posting it here.
    (It was also kinda obvious a new version was coming out due to the site changes on FTP etc)

    I hope nobodies pissed over it.
  • I think the connection between Novell and Astaro means that ASL will be based on SUSE products in future too. Now it's based on a certain SUSE product, heavily modified of course. What interests me (in addition to the SATA support), is the WLAN support on ASL. Now it seems too limited harware wise.