Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 3 subscribers
  • Views 623 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Problems with third NIC

Rick_01
Today I installed a third NIC on my Astaro box. I installed Astaro completly from CD afgain, just to be sure..... The new NIC was properly detected and installed. So far, so good. 
The problem is when I go to network => interfaces to bring the NIC up I can not access the Internet anymore from the LAN. When I bring the NIC down again everything works fine. There is no UTP connected to the third card.....

Here's my config:

ETH0: 192.168.1.1, subnet: 255.255.255.0, gateway: (ISP gateway)
ETH1: xxx.xxx.xxx.xxx, subnet:255.255.255.0, gateway[:(]ISP gateway)
ETH2: 192.168.0.1, subnet: 255.255.255.0, gateway: (ISP gateway)

I have a masq rule from ETH1 to ETH2, packet rules also installed corectly ( it works when i bring ETH2 down)

Anyone with suggestions that might help?  


This thread was automatically locked due to age.
Parents Reply Children