Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

I Can't get it up, help! (not perverted)

I know this looks long, but it's really not bad, I'm basicly just asking one question, but telling what I've done...please help me.

   Ok, I've spent all day long trying to get this to work, but it's not happenin...I'm able to get this working using Smoothwall, and ClarkConnect, but not with Astaro yet, and I *REALLY* want to use Astaro..please dont make me go back to smoothwall...help me.

All ya gotta do is fill in the blanks, here's my info..

5 Statics. ( ADSL )
Gateway = 66.123.205.177
Useable = 66.123.205.178-182
Mask = 255.255.255.248
DNS = 206.13.28.12 & 206.13.31.12

I'm doing a 2 nic setup..external and internal.

During setup, it asks me for the IP I want for the internal.. I do: 192.168.1.100
it then asks for netmask, I do: 255.255.255.0
then the gateway: ?__________?

external: I want the ip to be: 66.123.205.178
netmask: 255.255.255.248

What else needs to be done?...I can't find an install manual...I messed around with the web interface for a while, and tried different localhost gateways, but it didn't work..maybe the probs on the client side? Here's how my settings look..

Windows box ( internal side )..
IP: 192.168.1.150
netmask: 255.255.255.0
gateway: 192.168.1.100
DNS: 206.13.28.12 & 206.13.31.12


This thread was automatically locked due to age.
Parents
  • hello draino

    lets see if i can help you:

    the gateway is the next hop after your external interface. this means your router or adsl-router/modem.

    your windows box seams also o.k.

    then you need to mask internal->external and put in a rule like internal->http->any->http->allow.

    this should work.

    you can find a docu under http://docs.astaro.org. 

    greetings
    eldorado

    [ 22 August 2001: Message edited by: eldorado ]
Reply
  • hello draino

    lets see if i can help you:

    the gateway is the next hop after your external interface. this means your router or adsl-router/modem.

    your windows box seams also o.k.

    then you need to mask internal->external and put in a rule like internal->http->any->http->allow.

    this should work.

    you can find a docu under http://docs.astaro.org. 

    greetings
    eldorado

    [ 22 August 2001: Message edited by: eldorado ]
Children