Guest User!

You are not Sophos Staff.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 5 replies
  • Answers 1 answer
  • Subscribers 6 subscribers
  • Views 12029 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Multiple networks and multiple gateways

CaseyJCO

Hi,

 I have 2 internet connections, 1 is business, 1 is home.  Both are plugged into the UTM on different interfaces.  I have 2 internal networks, 10.0.0.x and 10.150.0.x. - The 10.150.0.x uses the business connection (static IP) for servers, etc.  The home connection I have setup with one of the interfaces plugged into the switch and setup as 10.0.0.1, and dhcp setup on the UTM with 10.0.0.50-250.  However, I need traffic going through 10.0.0.1 to use the home internet connection, not the business internet connection.  Right now, any traffic routed through the 10.0.0.1 gateway is being routed out the business connection.  Also being able to still access devices on the 10.150.0.x subnet is a requirement (which I can do now).

How do I fix this? Do I not set a default gateway on the UTM? Or add a gateway static route? I'm usually pretty good with this, but this one has me stumped.

EDIT: I tried the multipath option, and can't ping out anything when pointed to the home network.. however if I connect a laptop to that connection it works fine.  In the interface settings, it is getting a DHCP routable address and an IPv6 address.

Thanks!



This thread was automatically locked due to age.
Parents
  • 0

    If oldeda's suggestion isn't what you needed, Casey, please show us a simple diagram of your topology including subnets, modems, switches, etc.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson

    Hi,

     

    So I ended up creating a virtual XG home license and using that for my home network then creating a route between the 2.. I tried the options you both provided but that didn't work.. I'd either get internet going only out one or the other.. but not simultaneous out of separate connections..   This way it works as needed.

     

    Thanks!

Reply
  • 0 in reply to BAlfson

    Hi,

     

    So I ended up creating a virtual XG home license and using that for my home network then creating a route between the 2.. I tried the options you both provided but that didn't work.. I'd either get internet going only out one or the other.. but not simultaneous out of separate connections..   This way it works as needed.

     

    Thanks!

Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?

Unfiltered HTML