Guest User!

You are not Sophos Staff.

Request routing to second gateway

Hello everybody,

today I installed a second internet gateway (Cable) in our ASG which is planned to be used as primary internet gateway. Our previously existing (DLS) gateway will still be existing as our primary mail gateway, because it has a static IP.

What I want to achieve now is, that if inside of the network a PC uses the IP X.X.X.203 as his default gateway, he will be routed outside using the DSL line.
If on the other hand a PC uses X.X.X.212 as his default GW IP, he should be routed to the Cable line.

Up to this point, I have assigned the 212 IP as an additional address on the Internal interface. After this, I tried different configurations to achieve my goal, but none of them seemed to work.

So my question is, if it is generally possible with the essential ASG to achieve the goal, and  if, how this is done?

Thanks in advance for your help.

With kind regards,
Oliver Braun
  • This is not possible with any device of any brand. There's no difference between specifying .203 or .212 as both are associated with the same MAC address.  The packets are sent to the MAC, not to the IP.

    You can use a policy route and a SNAT that depend on the source IP. Search the KnowledgeBase for second WAN. 

    Cheers - Bob

    Sorry for any short responses!  Posted from my iPhone.
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • I would suggest to use WAN link balancing to handle the two uplinks.
    Set the default gateway on all systems to the same internal ip of the Astaro,

    Than use multipath rules to bind SMTP traffic to the DSL link, and make the new cable the primary for HTTP and HTTPS or similar.

    Hope that helps
    Gert
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?