I've noticed an issue since the update to 8.173/8.174 involving wireless clients; if I have more than 1 wireless client (laptop) connected to my test ASG via an AP10, both clients suffer severe performance impact; even simple, low-bandwidth web browsing is intermittent, and even accessing webadmin is intermittent / slow. If I put one of the machines to sleep, or shut them off, performance returns to normal levels. It's not about bandwidth (very little traffic is involved). I've tried changing the encryption types (was set at WPA2 Personal before, tried WPA personal to no effect), etc... I think it may have something to do with the fact that I have client isolation enabled. The laptops are using different WLAN nics / chipsets, and work fine individually, so I don't think it's a NIC incompatibility. This all worked fine in 8.172, except for the fact I have to have spoof detection disabled to use my AP10 in my particular configuration (see my other bug report). Spoof detection is still disabled, btw. I see no drops in the packet filter logs, no IPS detections, etc. Network Awareness is disabled. I can send the wireless log from last night to whoever's interested via PM, just let me know.
The wireless.log unfortunately doesn't show any unusual behavior on the AP. Not sure what went wrong. Did you try to reboot the AP by powering if off and on again (to rule out if it is an AP issue).
I have problems with dhcpv6 too. It is not the same error you have in your logfile. But in my situation dhcpv6 restarts everytime when a client aksks for a lease.
I have problems with dhcpv6 too. It is not the same error you have in your logfile. But in my situation dhcpv6 restarts everytime when a client aksks for a lease.
