[8.163][QUESTION][ANSWERED] NTP functionality

Hi All

If I enable the NTP functionality on my ASG (pic 1) and don't have any pf rules the NTP traffic fails.

2011:04:17-11:52:59 ***** ulogd[5221]: id="2001" severity="info" sys="SecureNet" sub="packetfilter" name="Packet dropped" action="drop" fwrule="60002" initf="eth1" outitf="ppp0" srcmac="0:1f:c6:e2:c5:1d" dstmac="0:b0:c2:2:e4:4f" srcip="192.168.2.1" dstip="192.43.244.18" proto="17" length="76" tos="0x00" prec="0x00" ttl="127" srcport="123" dstport="123"


The ntp server was : time.nist.gov (which is already set at -pic2 )

On an old port Jack (https://community.sophos.com/products/unified-threat-management/astaroorg/f/51/t/20929) mentioned that the best way to do this is by allowing the traffic via pf rules. 

Is there a known issue with the NTP functionality? I can resolve the issue by disabling NTp functionality (pic1) and creating the relevant pf rules

Thanks
Parents
  • "Normal" depends on what you want to achieve. If you want to use an external NTP server instead of using the ASG, then the answer is "Yes". Yes, you have to configure packetfilter rules to allow this.
    The NTP functionality of the ASG makes the ASG act as an NTP server. In this case you configure your clients to use the ASG as the NTP time source and then you don't need the pf rules.

    And yes: that's the way we designed it to work. [;)]

    Cheers,
    Kai
Reply
  • "Normal" depends on what you want to achieve. If you want to use an external NTP server instead of using the ASG, then the answer is "Yes". Yes, you have to configure packetfilter rules to allow this.
    The NTP functionality of the ASG makes the ASG act as an NTP server. In this case you configure your clients to use the ASG as the NTP time source and then you don't need the pf rules.

    And yes: that's the way we designed it to work. [;)]

    Cheers,
    Kai
Children
No Data