Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Replies 44 replies
  • Subscribers 0 subscribers
  • Views 17573 views
  • Users 0 members are here
Options
Suggested

[7.902][QUESTION][ANSWERED] Vlan Slow

wrzmhe
Hi all 

i have an

eth1 [Intel Corporation 82541PI Gigabit Ethernet Controller]
Auto negotiation: On
Supported link modes: 10baseT/Full,10baseT/Half,100baseT/Full,100baseT/Half,1000baseT/Full
MAC Address: *********
Interrupt (IRQ): 17
PCI Device ID: 0x107c:0x1376
MII capable: No
HA link monitoring: No



on asg 7.902 and on this nic i have 4 vlans enabled 1 disabled

if i copy from one vlan to an other (50 to 60 ) i only get 42Mbps data transfer rate 
if i copy from  vlan 50 to vlan 50 data transfer is ok 

Settings for eth1:
        Supported ports: [ TP ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Advertised auto-negotiation: Yes
        Speed: 1000Mb/s
        Duplex: Full
        Port: Twisted Pair
        PHYAD: 0
        Transceiver: internal
        Auto-negotiation: on
        Supports Wake-on: umbg
        Wake-on: g
        Current message level: 0x00000007 (7)
        Link detected: yes


has anyone an idea why transfer over astaros gigabit nic is soo slow 
it is connected to an netgear gs108T gigabit switch 
thanks for info / help
Parents
  • 0
    Hi,

    can you maybe provide more information about if you do run an IPS or not, what your CPU level is when doing that and what your overall settings regarding the system are?

    If you copy from VLAN 50 to VLAN 50, doesn't this mean that the traffic does not traverse the ASG?

    What would your results be in comparison if you wouldn't use virtual interfaces, but do the Inter-VLAN routing with 2 physical interfaces instead that are switchwise configured to belong to VLAN 50 and 60 respectively?

    A comparison like: "these are my results if I use physical interfaces" compared to "these are my results if I use virtual interfaces" would be helpful.

    Thanks in advance
    Christian
Reply
  • 0
    Hi,

    can you maybe provide more information about if you do run an IPS or not, what your CPU level is when doing that and what your overall settings regarding the system are?

    If you copy from VLAN 50 to VLAN 50, doesn't this mean that the traffic does not traverse the ASG?

    What would your results be in comparison if you wouldn't use virtual interfaces, but do the Inter-VLAN routing with 2 physical interfaces instead that are switchwise configured to belong to VLAN 50 and 60 respectively?

    A comparison like: "these are my results if I use physical interfaces" compared to "these are my results if I use virtual interfaces" would be helpful.

    Thanks in advance
    Christian
Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?