Guest User!

You are not Sophos Staff.

[7.386] Site2Site VPN with Multipath

Hello everyone!

I have an ASG120 with the new 7.386 firmware. Now I want to configure a Site2Site VPN tunnel with the Multipath option. 
eth0 - Internal 
eth1 - ADSL
eth2 - Ethernet Standard (public IP)

eth1 and eth2 are configured as Multipath and works very well but I can't get the Site2Site VPN to work. The other VPN Gateway is also an ASG but I have no idea to configure on this one the remote Gateway. I have already tried to configure two VPN tunnels but only one goes up. The second one can't go up because both have the same remote network... I should think before doing such a stupid configuration [8-)]
Have someone any ideas?
Parents
  • You need only one tunnel.

    Basically you configure Site2Site SSL on one ASG (as server), download the configuration (download button will come up when configured server) and create the SSL Site2Site Client using that configuration file on the remote ASG. You may have to override the peer hostname on client side if the hostname of the SSL VPN server is not publicly resolvable.

    On the server side, you configure the local private network(s) as "local" and the remote private network(s) as "remote". Doing so, no further configuration is required on client side after importing the downloaded file.
Reply
  • You need only one tunnel.

    Basically you configure Site2Site SSL on one ASG (as server), download the configuration (download button will come up when configured server) and create the SSL Site2Site Client using that configuration file on the remote ASG. You may have to override the peer hostname on client side if the hostname of the SSL VPN server is not publicly resolvable.

    On the server side, you configure the local private network(s) as "local" and the remote private network(s) as "remote". Doing so, no further configuration is required on client side after importing the downloaded file.
Children
No Data