Syskonnect Gigabit SK 9821-V2 not detected

Hi,

I mentioned it a few weeks before, but it may have got lost:

The Syskonnect Gigabit Ethernet Adapter SK 9821-V2 is _not_ recognized by ASL 3.2 or 3.318.

I haven't tested 3.380 yet because of another problem mentioned in my last post.

So: Either you should include the syskonnect patch for the V2 adapter (prefered), or you should correct the HCL and exclude this card.

Regards,

Christopher
Parents
  • Christopher,

    please post the exact type of the card as well
    as the PCI ID which can be found in /proc/bus/pci/devices.

    Thanks for your cooperation
    o|iver
  • Hi,

    this is the output of /proc/pci:

      Bus  0, device   9, function  0:
        Ethernet controller: SysKonnect SK-98xx Gigabit Ethernet Server Adapter (rev 17).
          IRQ 17.
          Master Capable.  Latency=64.  Min Gnt=23.Max Lat=31.
          Non-prefetchable 32 bit memory at 0xe8000000 [0xe8003fff].
          I/O at 0x1000 [0x10ff].

    This is from /usr/src/linux/drivers/pci/pci.ids of a patched 2.4.20 kernel:

    1148  SysKonnect
            4320  SK-98xx Gigabit Ethernet Server Adapter
                    1148 5021  SK-9821 V2.0 Gigabit Ethernet 10/100/1000Base-T Adapter

    Hope, that helps.

    Christopher
Reply
  • Hi,

    this is the output of /proc/pci:

      Bus  0, device   9, function  0:
        Ethernet controller: SysKonnect SK-98xx Gigabit Ethernet Server Adapter (rev 17).
          IRQ 17.
          Master Capable.  Latency=64.  Min Gnt=23.Max Lat=31.
          Non-prefetchable 32 bit memory at 0xe8000000 [0xe8003fff].
          I/O at 0x1000 [0x10ff].

    This is from /usr/src/linux/drivers/pci/pci.ids of a patched 2.4.20 kernel:

    1148  SysKonnect
            4320  SK-98xx Gigabit Ethernet Server Adapter
                    1148 5021  SK-9821 V2.0 Gigabit Ethernet 10/100/1000Base-T Adapter

    Hope, that helps.

    Christopher
Children
No Data