Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 9 subscribers
  • Views 635 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Configuring Sophos Central Wireless SSID with Radius Authentification

Jerome Droux

In the Sophos documentation for configuring a Radius Server for an SSID in Sophos Central, it is indicated that you must create a Radius client for the access point with its IP, as well as a Request Policy with its serial number.

Following this documentation, it works fine.

Now I would like to set up this configuration for a client who has more than 100 access points.

Do I also have to create a Client Radius with the IP and a Request Policy with the serial number for each access point?



This thread was automatically locked due to age.
Parents
  • 0

    Hi there! I believe that for your client with over 100 access points, you would indeed have to create a Client Radius with the IP and a Request Policy with the serial number for each access point. It might seem like a lot of work, but following the Sophos documentation should ensure that the configuration works smoothly. Good luck with your Replacement Windsor service!

Reply
  • 0

    Hi there! I believe that for your client with over 100 access points, you would indeed have to create a Client Radius with the IP and a Request Policy with the serial number for each access point. It might seem like a lot of work, but following the Sophos documentation should ensure that the configuration works smoothly. Good luck with your Replacement Windsor service!

Children
No Data
Unfiltered HTML